Model #91195292990 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Wire Harnesses/wiring Components
    3 Results
  • Maintop
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Door Lock
    3 Results
Find part by diagram >

Question and Answers

Q:

installation instructions for thermostat for oven model 9111.95292990 911.95292990

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.


 The sensor probe in the oven appears to be mounted on the bracket for the broil element. You can either access that oven temperature sensor probe from inside the oven by removing the mounting screws and pulling the wires into the oven. Note: It may be easier to access the disconnect plug for that oven temperature sensor probe from the back of the range. Remove the outside back panel to access that wiring (with the range still unplugged).

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.



Read More
Natasha12 -
Sears Technician
July 23, 2015
Q:

Swapping 4 prong plug for a 3 prong plug.....

A:

I know that it can be difficult to change some parts on your range without the right instructions. While you are waiting for your expert answer, I was able to find a link that will provide some helpful information. I hope this helps.

Read More
aashe -
January 16, 2012
A:

Thank you for your question.

I will be happy to assist you. You can connect a three-wire cord to the range. I have posted an image below that shows how to install the three-wire cord. Click on the image to enlarge it. Before plugging the cord into the outlet make sure all the connections are tight.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 18, 2012
See more answers
Q:

About Kenmore Model# 91195292990 oven with range

A:

Manage My Life is a great website to speak directly to an expert who can help you every step of the way to solving the problem you are having. An expert shall have an answer to your question within 24 to 48 hours. Have a great day.

Read More
Alina F. -
August 13, 2011
A:

The Oven-On light is controlled by the control board in the console. Your failure does point to a bad control board (part WB50T10044). Replacing that part should fix your problem. You can order that control board from the Sears PartsDirect website. Unplug the range and follow the steps shown in the image below to access that control board in the console.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
August 15, 2011
See more answers

Top Parts