Model #91195061690 KENMORE Free Standing, Electric

  • Backguard Section
    3 Results
  • Main Top Section
    3 Results
  • Door Section
    3 Results
  • Body Section
    3 Results
  • Wire Harnesses And Components
    3 Results
Find part by diagram >

Question and Answers

Q:

Electric Kenmore Range #91195061690: Both bake & broil elements do not work. Is this due to the ERC/Clock ? How do I

A:

I'm sorry to hear that you are having some difficulties with your Range. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Priscilla V -
October 26, 2011
A:

According to the technical information that I see on this range, the clock is just a time-of-day display. The oven heating elements are controlled by the oven thermostat on that console. Check to see if the "Oven On" light illuminates then you set the oven in that bake or broil mode. If it does not come on, then your likely failure is in the oven thermostat (part WB20K5027). Replacing that component will likely fix this problem. You can order that part from the Sears PartsDirect website. Here is a direct link for that part: Oven Thermostat . Unplug the range before accessing and replacing parts. You can open the console by removing the screws from the endcaps of the console. Pull the bottom of the console out while pushing down on the top to release it. Lay the console down on the cook top. You will need to route that temperature sensor on the thermostat to the same location as the original sensor.

These tips should help you repair this range failure. If you need more assistance, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
October 27, 2011
See more answers
Q:

Kenmore oven model 91195061690. How do I calibrate the temperature setting?

A:

I see you want to calibrate your temperature setting. A suggestion I have is going to the top of the page and clicking on the tab that says "MANUALS" then typing in your model number. Your owners manual should appear giving you the information you need for calibration. I have attached the link below. Hope this helps!

Read More
Alina F. -
September 30, 2010
A:

Thank you for your question.

Getting your oven baking at the right temperature is the right thing to do.

  • I will give you a image of the of the technical manual that describes how to do this with your range.

I hope this will resolve you calibration issue with your oven.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
September 30, 2010
See more answers

Top Parts