Model #9119399582 KENMORE Free Standing, Electric

  • Backguard Section
    3 Results
  • Main Top Section
    3 Results
  • Wire Harnesses
    3 Results
  • Body Section
    3 Results
  • Power Lock Section
    3 Results
  • Oven Door Section
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I replace the baking element part# WB44K5012?

A:

Some oven repairs are easier to do by the homeowner than others. This seems to be one that is easier. I located a similar question from a previous expert post for replacing the bake element. The model is a bit different but it may help you get started while you wait for the expert. If you care to take a look, I attached the link below.

Read More
Barbara H. -
March 05, 2011
A:

First turn the power off to the range. Open the oven door & remove the oven racks. Use a screwdriver to remove the 2 screws holding the bake element in place. Slide the bake element out far enough so you can remove the 2 wires connected to the bake element. Install the new bake element in reverse order.

Read More
Kay W. -personal Solutions manager -
Sears Technician
March 07, 2011
See more answers