Model #9119384990 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Door Lock
    3 Results
  • Main Top
    3 Results
  • Oven Door
    3 Results
  • Body Section
    3 Results
  • Wiring Harness And Components
    3 Results
Find part by diagram >

Question and Answers

Q:

Oven display is flashing F4 and stops working properly..what does F4 mean?

A:

Hello, Ovens are very important appliances, so when they're not working properly it can cause some frustration. I researched your question and found someone else asked a question similar to yours. Here is what was posted by an expert, I have provided the link below. I hope this helps!

Read More
Jacqueline S -
July 05, 2010
A:

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

The F4 error code indicates a temp sensor problem. On this type of symptom we need to use an ohmmeter to check the temp sensor & temp sensor harness. Please see the testing instructions from the service manual provided in the image below. Be sure to use extreme caution & disconnect power before attempting removal of panels & accessing the control. Temp sensor; WB21X5301 www.searspartsdirect.com

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
biker dave -
Sears Technician
July 08, 2010
See more answers

Top Parts