Model #9119384591 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Door Lock
    3 Results
  • Main Top Section
    3 Results
  • Oven Door
    3 Results
  • Body
    3 Results
  • Wire Harness
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I open the back of our free standing electric range?

A:

First, disconnect the power to the range.

The rear panel covering the rear of the element terminals should come off once you have all the appropriate screws removed. The Bake element should be part# WB44K5012 and I'm not sure which leads you need to bend. Normally, you should not need to bend the wire connectors or the element terminals in order for the leads to reach. I know that they do not always provide enough length in the wires to easily install them on the element but you should not need to bend the leads. Once you have the rear panel off you probably will find some slack in the wires to pull in order to reach the element terminals.

Read More
Joey S -
Sears Technician

Top Parts