Model #9119382190 KENMORE Free Standing, Electric

  • Backguard Section
    3 Results
  • Main Top Section
    3 Results
  • Door Lock Section
    3 Results
  • Oven Door Section
    3 Results
  • Body Section
    3 Results
  • Wire Harnesses And Components
    3 Results
Find part by diagram >

Question and Answers

Q:

kenmore range oven model 911.9382190 range control panel and oven not working 911.9382190

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your range. Upon researching model 911.9382190; it could be the control board has failed. The control board is used for the oven. The lights will have their own switch and the stove top will have its own switches.

 Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
October 30, 2014
Q:

Error on Kenmore electric range 9119382190 Kenmore Free standing, electric

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is problems with the range.
 
Glad to help out.   Im  looking at your Kenmore Range model number 9119382190.

Let me find out the F2 for you and give all information that the service manual states that it is.

The "F2" fault code means "Oven Over Temperature". The oven exceeded 624 degrees with the door unlocked or it exceeded 925 degrees with the door locked.

If no over temperature conditioned occurred; look for high resistance connection or other cause of high resistance in the temperature sensor circuit. It could also have a faulty oven temperature sensor too. I recommend removing and disconnecting the oven temperature sensor. The oven sensor can be located inside the oven cavity on the rear wall. The oven temperature sensor should measure approximately 1100 ohms at room temperature. If the oven sensor measures 1100 ohms, reconnect and install the oven sensor. Next, in order to check for high resistance in the connections, disconnect the range from the power supply and then access the electronic oven control/clock and disconnect the oven temperature sensor harness. Re-measure the resistance of the sensor circuit. It should measure approximately 1100 ohms or read what was measured directly across the sensor leads. If the resistance measures the same at the control board as it did at the sensor then I would have to assume the oven control board is faulty. The sensor is part #WB21X5301 and the oven control board is part #RFR-CCS . Bad news is the control board is no longer available.  

May be a wise time to just get a new oven.
 
Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
June 05, 2014
Q:

electric range

A:

A range is a important appliance we use in a daily basis in our home, I can understand your concern in having a proper working range. I came upon some information that can be very helpful. To view I have attached the link below. Hope it helps!

Read More
maira -
September 22, 2012
A:

Thanks for the question about the range error code F2. I am sorry to hear you are having a problem, I will be glad to assist.
The error code F2 indicates that there is a problem with the oven sensor or the main control. There are components that will need to be tested to determine the exact problem. Testing these components requires special tools and equipment, as well as technical expertise. I suggest having a qualified technician come and service the range. Should you feel confident in testing the product and components, reply with details. I will add a link to service should you decide to call.

Thanks Ron H.
: Sears Home Services .

Read More
Ron H -
Sears Technician
September 24, 2012
A:

Thanks for the answe!

Read More
Carol -
June 05, 2014
See more answers