Model #9119369181 KENMORE Free Standing, Electric

  • Backguard Section
    3 Results
  • Door Lock Section
    3 Results
  • Main Top Section
    3 Results
  • Body Section
    3 Results
  • Oven Door Section
    3 Results
  • Wire Harnesses And Components
    3 Results
Find part by diagram >

Question and Answers

Q:

Oven temperature is lower than temperature I set it to. 9119369181 Kenmore Electric range

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you.  I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

I'm looking at the information I’m showing the main issue to be the temperature probe. It’s not reading the properly, and that’s why you’re not getting the proper reading. I would suggest replacing the temperature prob.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
Samantha A -
Sears Technician
October 07, 2014
A:

SearsPartsDirect has no idea of what you mean. They have no part that matches what you describe. Did yuo mean the sensor? Can this model be calibarated and if so, how?

Read More
Glenn -
October 07, 2014
See more answers
Q:

Control panel buzzes when Bake or Broil is selected 9119369181 Kenmore Electric range

A:

Thank you for your question and I understand your concern.

Based on your symptom and details, the electronic oven control/clock assembly is most likely faulty causing the buzzing noise. If the buzzing noise is emitting from the electronic oven control/clock assembly, then I suspect it will need to be replaced. A faulty sensor would not cause it to buzz. I looked up the oven control/clock assembly and it is no longer available through the original manufacturer. No authorized substitutions have been identified. If you choose to purchase a new product,please visit www.sears.com.


Read More
Joey S -
Sears Technician
October 15, 2013
Q:

Kenmore electric range had small flame on baking element, now does not heat up, can it be something besides bake element

A:

I understand that your Kenmore electric range is not heating up. A suggestion that I have for you while you wait on your experts response is referring back to your owners manual because it might have the information you are looking for. Below I attached a link that will provide you with the manual if you do not have yours. I hope this has been helpful for you.

Read More
Alina F. -
December 24, 2010
A:

Thank you for your question.

Not having your oven working can be very inconvenient.

Other than food dripping onto the element a small flame on an oven element usually means the element has burned out and will need to be replaced.

  • If you look closely at the element where you saw the flame you will notice a burnt or a hole in the outer skin of the metal casing which will indicate the element has failed.

Hopefully it is the element because the electronic oven control is no longer available.

The bake element part number is;WB44K5012 and you can purchase it from;Sears Parts Direct .

If you are going to replace the element yourself please use the link, and I will be glad to help you with instructions.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
December 27, 2010
See more answers