Model #9119354191 KENMORE Free Standing, Electric

  • Backguard Section
    3 Results
  • Main Top Section
    3 Results
  • Door Lock Section
    3 Results
  • Body Section
    3 Results
  • Wire Harnesses And Components
    3 Results
  • Door Section
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a Kenmore electric range #9119354191 and it is displaying a 302 error code. Sometimes it displays 3, or 2, or 302. My oven and clock are not working.

A:

I know it can be upsetting when the range is not working. I did not research on Managemylife and I was not able to find a answer related to the error code. A expert will be able to provide you the best possible answer for you within 24-48 hours. If you decide to setup service there is a link below to do that.

Read More
Marc H -
February 22, 2012
A:

I want to apologize, I did do some research on this answer this question and was unable to find the answer.

Read More
Marc H -
February 22, 2012
A:

Thank you for your question on the error codes on the range.

I am not sure if what you are saying is referring to an error code.

Usually the first letter is an F and then the error code number.

Have you recently used the self clean cycle?

I think the error code you are seeing is the F3 or FO3 error code which would indicate that the oven temperature sensor probe is out of calibration and will need to be replaced. If you are also getting the F2 code it could be related to the same problem.

Oven temp sensor .

Please reply with further clarification on the error codes you are getting and if you can clear them with the cancel button.

Please let me know what you find to be the case and we can continue to troubleshoot with that information.

Sam A.

Read More
Sam A -
Sears Technician
February 22, 2012
See more answers
Q:

Trying to replace the electronic control board 2 wires are sticking out yellow and purple. They are left over wires which goes to bake and broil?

A:

Trying to replace wires on an appliance can be quite the challenge to do. While you are waiting on an expert to answer your question, I was searching in the Sears Parts Direct website and found your diagram. I have attached the link below. Hope this helps!

Read More
Dezeray S -
January 18, 2011
A:

Being able to replace parts yourself can save a lot of money. Make sure you have the replacement control listed for this model, which is # RFR-CCS. I'm attaching a picture of the wiring diagram for this range. I hope this will help you. If you would like more assistance, any additional details will be helpful and I will be glad to assist you further. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
January 19, 2011
See more answers
Q:

I am trying to use my self cleaning oven and my oven won't lock. What can I do to resolve this issue?? I don't want to force it.

A:

I can understand your concern over the issue that you are having with the range. I placed a link down bellow that i believe will be very beneficial. I hope that you can try some of the helpful tips and get the self cleaning cycle up and running

Read More
celene -
January 07, 2011
A:

Thank you for your question and I understand your concern. If you�re not able to slide the lock handle far enough to the right in order to lock the door, the lock handle could be bent or the door lock could have been damaged previously by forcing the handle to the unlocked or locked position. There is a Bi-metal coil that works by temperature. When the Bi-metal heats, it causes the Lock/Unlock mechanism to rotate clockwise prevent the door latch from being opened. If something mechanical has failed, the door will not likely lock.

You may need to push in slightly on the door while sliding the lock handle over to the right. If it does not slide easily, it may not be fully extended. Once the door is locked the Oven ON light and Lock Door indicator lights will glow indicating the start of the clean cycle.

You can access the door lock mechanism by raising the top and removing the door latch cover (key#175). NOTE: Disconnect the range from the power source before raising the top and removing the cover from the door lock assembly. I added an image below with some information how the door lock assembly operates.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
January 10, 2011
See more answers

Top Parts