Model #9119321190 KENMORE Free Standing, Electric

  • Backguard Section
    3 Results
  • Door Lock Section
    3 Results
  • Main Top Section
    3 Results
  • Oven Door Section
    3 Results
  • Body Section
    3 Results
  • Wire Harnesses And Components
    3 Results
Find part by diagram >

Question and Answers

Q:

kenmore electric stove 911.9321190

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
aashe -
December 04, 2011
A:

That model of electric range uses 220 volt power. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
December 06, 2011
See more answers
Q:

What does code F1 on my electric range & how do I clear it?

A:

Receiving an error code can be confusing at first. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Jackie S -
December 02, 2011
A:

The "F1" fault code indicates an error in the electronic oven control board The failure is most likely the electronic oven control board and a slight possibility of a faulty oven temperature sensor probe. I have provided you with an image below that also explains the F1 error code.

The oven temperature sensor can also be removed from inside the oven cavity and tested using an ohm meter if you know how to use one. Note : Always shut off the breaker and unplug the range before accessing any internal components. If the sensor measures approximately 1050 to 1100 ohms, replace the oven control board. You can also try clearing this error code by flipping the breaker or unplugging the range for 1-2 minutes. However, this may only be a temporary fix and the error code may come back.

If you do not feel confident repairing this problem yourself, then I recommend scheduling service to having a technician properly diagnose repair your range. You may do this at www.SearsHomeServices.com . If you have any other questions please reply back to this thread. Thank you for contacting Manage My Life.

Read More
Tammy S -
Sears Technician
December 04, 2011
See more answers
Q:

Where does part#WB21X5301 go on my model#9119321190 range?

A:

Where does part#WB21X5301 go on my model#9119321190 range?

You can see the information by clicking on the link below. The part number you requested is #255 on the diagram and is actually a substitute for part#WB08K5007.

http://www.searspartsdirect.com/partsdirect/getSubComp.pd?modelNumber=9119321190&productCategoryId=0124111&brandId=0582&brandDescription=KENMORE&modelName=ELECTRIC-RANGE&diagramPageId=00005&componentDescription=BODY%20SECTION&documentId=00058023&blt=06

Read More
Joe G. - Personal Solutions Manager -
Sears Technician
January 02, 2010