Model #9119114190 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Main Top
    3 Results
  • Oven Door
    3 Results
  • Body
    3 Results
  • Wire Harness And Components
    3 Results
Find part by diagram >

Question and Answers

Q:

The top right front burner receptacle is bad. What is the part number? 9119114190 Kenmore 30

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Kenmore range model 9119114190. I am so sorry the receptacle for the top right front burner has burnt inside. I will be happy to help you with this. I have included the link below for you to view and order the terminal block. This is the part the burner element plugs into. The wiring comes with the part. 

I recommend you also check the burner element itself, and replace it if necessary. I have included that link for you also.

SAFETY WARNING: Disconnect the power supply before beginning your repair to prevent the risk of electrical shock which can result in property damage, serious personal injury or even death. If you are not comfortable completing this repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663 (1-800-4MY-HOME). I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
December 27, 2014
Q:

Kenmore Range Model 911.9114190 won't bake properly, why?

A:

A oven is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Jackie S -
October 20, 2011
A:

It's important that both heating elements (bake and broil) are working inside the oven. Make sure the broil element and bake elements work because the oven control cycles the broil element on and off during the baking cycles. To see if the broil element is working start a broil cycle when the oven is cold. If it's not working then that is likely the reason why it's not baking correctly.

The next thing to check is the operating temperatures. The oven temperature should be checked once the oven has had time to pre-heat and cycle off and back on 2-3 times. If it appears to maintain an average temperature but just not reaching the set temperature then you can adjust the off set temperature on the oven control board. The instructions for calibrating the oven are located on page 16 of the owner's manual. If the manual has been misplaced, I provided you with a direct link to the manual below.

Owner's Manual

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services . I hope this helps.

Read More
Korinna S -
Sears Technician
October 20, 2011
See more answers
Q:

Model 9119114190 Electric Range replacement parts

A:

Managemylife.com is a great web site to find the answers to just about anything, especially on appliances. I have provided the link to your specific Kenmore Range so you can check out any parts you may need and their prices. I hope this will assist you until your expert can respond to your specific question.

Read More
James -
September 21, 2011
A:

Thank you for your question and I understand your concern.

The 8" surface element is part #WB30X253 and the receptacle and wires is part #WB17X210. You can order the parts at Sears PartsDirect .

NOTE: Disconnect the power supply from the range before replacing the surface element and receptacle.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
September 23, 2011
See more answers

Top Parts