Model #9117137911 KENMORE Range (gas)

  • Backguard Section
    3 Results
  • Main Top Section
    3 Results
  • Burner Section
    3 Results
  • Body Section
    3 Results
  • Oven Door Section
    3 Results
  • Wire Harnesses And Components
    3 Results
  • Optional Rotisserie
    3 Results
Find part by diagram >

Question and Answers

Q:

how to replace grey colored gasket that oven door presses against when closed? 9117137911 Kenmore Kenmore 30 in. gas range

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

 

Read More
Joseph P. -
July 22, 2013
A:

Thank you for choosing SearsPartsDirect.com. I understand how important it is to be able to properly replace your door gasket. Part key # 191 should be the only thing you would need to order since # 184 is completely seperate and still in tact in your oven. I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link below to be taken to the page.
Door Gasket for Kenmore Range Model # 9117137911
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services
If you have further questions please let me know. Thanks for using SearsPartsDirect.com.

Read More
Desirea -
Sears Technician
July 23, 2013
See more answers
Q:

stuck gas valve on kenmore range top

A:

Hi, Since you need that part for your Kenmore range and is no longer available, A suggestion that I have is to visit SearsHomeServices.com I have provided the link below. Hope this helps!

Read More
Salina L -
July 27, 2010
A:

On something like this I recommend calling for service. A service technician may be able to fix the valve you have, locate hard to find inventory & replace the valve or remove the valve & have it sent in for repairs. Here is a link for the website: Sears Home Services .

Read More
biker dave -
Sears Technician
July 28, 2010
See more answers
Q:

Can I light my Kenmore gas oven with a match if the igniter is broken?

A:

You will not be able to light the oven with a match. The oven safety valve will not open and let gas flow into the burner if the igniter is broken or if it's too weak. You will need to remove and replace the broken igniter.

The igniter is part #WB2X9154. I added a link to Sears Parts Direct with the igniter already looked up for you. Click on "Igniter-oven and broiler" below to open link.

Read More
Joey S -
Sears Technician
November 12, 2009