Model #9116422190 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Maintop/wire Harnesses/components
    3 Results
  • Door Lock
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Front Panel
    3 Results
Find part by diagram >

Question and Answers

Q:

What kind of screw is in this part and what is the tool needed to remove it?

A:

I know that repairs can be very frustrating without the proper tools. While you are waiting for your expert answer, I was able to do some research on the part. It says that it is a standard screw, which usually means a philps head screw. However, it does not give me a clear picture of the screw. I would suggest that you wait for the expert answer, before doing anything. I hope this helps.

Read More
aashe -
August 22, 2011
A:

Thank you for your question and I understand your concern.

Without seeing a picture of the screw I would not be able to know what type of tool is needed. If it has a hex head then it may require a 1/4 inch nut driver or a 1/4 inch socket. If it looks like a star then it will likely require the proper size torx driver.

If you can send a picture of the screw in the thread it would help in identify the type of tool needed.

Read More
Joey S -
Sears Technician
August 24, 2011
See more answers
Q:

How can I find the model number to my Kenmore range to get more specific help?

A:

When it comes to appliance not working correctly it can be really frustrating, needing an owner's manual is great to have. While you are waiting on an expert to answer your question, a suggestion I have is to provided the model number to your Range so you can get a better answer from the experts!

Read More
Dezeray S -
March 29, 2011
A:

The model will be located around the opening of the oven door. Once the model number is found, it can be entered in the search bar in the upper right hand corner of our home page. After clicking on the magnifying glass , you will be provided with the manual and any previously answered questions regarding your model. Below are some general steps on setting the self clean cycle:

  1. Be sure the clock shows the correct time of day.
  2. Press SELF CLEAN . "� � �" appears in the display.
  3. Press the UP ARROW until "3:00" appears in the display for a 3 hour cycle, or press the DOWN ARROW until "2:00" appears in the display for a 2 hour cycle. For satisfactory results, use a 2 hour self-clean cycle for light soils and a 3 hour cycle for average or heavy soils.
  4. As soon as the UP or DOWN ARROW is released, " CLn " appears in the display.
  5. As soon as the controls are set, the motor driven lock will begin to close automatically and the � LOCK � indicator light will flash. DO NOT open the door while the light is flashing (it takes about 15 seconds for the oven door to lock).
  6. The " LOCK " light will glow until the cleaning cycle is completed or cancelled, and the oven temperature has cooled.

NOTE: The kitchen area should be ventilated using an open window, ventilation fan or exhaust hood during the first self-clean cycle. This will help eliminate the normal odors associated with the first self-clean cycle.

When the Self-Clean Cycle is Completed :

  1. The time of day or � End � will appear in the display window and the � Clean � and " LOCK " light will continue to glow.
  2. Once the oven has cooled down for about 1 HOUR and the " LOCK " light has gone out, the oven door can be opened.
  3. If � End � is in the display and the � Clean � indicator remains on, press STOP/CLEAR . The time of day will appear in the display.

CAUTION ! To avoid possible burns use care when opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

CAUTION ! DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the door after the self-cleaning cycle has completed. The oven may still be VERY HOT.

Read More
Korinna S -
Sears Technician
March 29, 2011
A:

I found the model number 911-6422190 but the search on that number gets no results. I can't get the self-clean cycle to work and I need some guidance on the correct procedure. It does not have a digital display.

Read More
Matthew -
April 01, 2011
A:

The owner's manual is only available for purchase from www.SearsPartsDirect.com. I provided you with a direct link to purchase the manual below. Please follow these instructions for the dial clock: First, the clock must operate and it should be set for the correct time of day. If you have a selector switch, set it to "Clean" as well as the oven thermostat. Lock the door by sliding the lock handle over to the lock position. You should have a start and stop knob on the clock. If you want the clean cycle to start immediately, the start knob/stem should be in the outwards position and not pushed in. If it's pushed in, rotate the start knob but don't push in and rotate it until it pops out. It should pop out when the time indicated matches the time of day clock. A normal cleaning time is 3-4 hours. Set the stop knob 3-4 hours ahead of the start time. Push the stop knob inwards and rotate ahead 3-4 hours ahead of the start time and the "Clean" cycle will begin. When the time of day clock matches the stop time, the clean cycle will shut off and then wait for the oven to cool down before unlocking the door. If the door will not unlock, it is still too hot. NOTE: Be sure to remove the oven racks before starting a clean cycle.

Read More
Korinna S -
Sears Technician
April 01, 2011
See more answers

Top Parts