Model #91149049200 KENMORE Built-In Oven, Electric

  • Control Panel
    3 Results
  • Wire Harness & Wiring Components
    3 Results
  • Body Parts
    3 Results
  • Door
    3 Results
  • Stainless Steel Door
    3 Results
  • Door Lock
    3 Results
  • Convection Fan
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Accessing the Control Board in the Kenmore Elite 911.49049200 Wall Oven

A:

I understand that you want to know how to access the control board on your Kenmore Elite wall oven. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina F. -
March 09, 2012
A:

Alina: The second link pertains to the Kenmore Elite Refrigerator and not the Wall Oven. Please edit your post to remove it.

Read More
Norman -
March 09, 2012
A:

You will need to shut off the house circuit breakers for the oven to completely disconnect electrical power first. You may be able to access that control board and ribbon cable connection from the front of the console without pulling the oven out of the wall. The image below shows the parts diagram for the oven. You can open the oven door and remove the screws (Key 875) to release that console. I am not certain that just removing those screws will completely release the console. You may see screws on the side or clips that need to be released. If you are able to release that console, you can carefully fold it forward and down to access the ribbon cable connection between the control panel and the clock control board that is attached on the back of that panel (Key 16). If you are not able to release the console from the front of the oven, then you will need to pull the oven out of the cabinet and remove that top panel over the control compartment (Key 416).

If you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician examine and repair the oven, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
March 10, 2012
See more answers
Q:

reset oven

A:

A oven is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Barbara H. -
November 25, 2011
A:

You can try to reset the clock control board in that oven by shutting off the house circuit breaker to completely disconnect electrical power for 5 minutes. When you power the oven back up, the control should be reset to factory default settings. You can set the clock as shown in that manual that Barbara H. posted in the above response. The control may work normally after using this procedure.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
November 28, 2011
See more answers
Q:

Why did my Kenmore oven stop working & start flashing F0?

A:

This is a known issue with this model of oven. Please see the attached image for an explanation & remedy.

Read More
biker dave -
Sears Technician
April 13, 2009

Top Parts