Model #91149034100 KENMORE Built-In Oven, Electric

  • Control (911.49032100/34100/39100)
    3 Results
  • Control (911.49033100)
    3 Results
  • Center Space
    3 Results
  • Upper Body
    3 Results
  • Lower Body
    3 Results
  • Door (911.49032100/34100/39100)
    3 Results
  • Door (911.49033100)
    3 Results
  • Door Lock
    3 Results
  • Convention Fan
    3 Results
  • Wire Harnesses And Components
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Compatible replacement for control pad on a Kenmore oven, model 911.49034100

A:

I did some research on the part and I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Joseph P. -
December 08, 2012
A:

That part WB36T10463 is the stainless steel color of control panel for the Kenmore oven that begins with model 911.4903 . . . Although that control panel is not the same color as WB27T10152, it should be compatible with the electronic oven control board in the console. It should mount onto the console in the same manner as the original color of control board. The information that I have available regarding this control panel indicates that it will be compatible and it should fit the oven. I searched for the information on other sites that indicates that this control board is not compatible with your oven model 911.49034100. I did not find that information through a web search. Reply with some links and I will look at the information from the other sites.

If you decide to use this stainless steel control panel on your oven, you can order it from this page: Control Panel -- Stainless for Kenmore Oven Model 911.4903 . . . . Be sure that you shut off the house circuit breakers for the oven before accessing internal components and replacing parts.

Read More
Lyle W -
Sears Technician
December 10, 2012
See more answers
Q:

How do I get a control panel with keypad for my Kenmore double oven model 911.49034100?

A:

According to the model number and part numbers that you submitted in your question and detail, it appears that you have a bisque colored oven. The control panel with keypad that I see listed in our parts system for model 911.49034100 in a bisque color is WB27T10152 (not WB36T10461). I am not finding the bisque color to be available. It does appear to be discontinued. The black and white colors of control panels are still available. If you can use the black console, you can order part WB27T10153. The part number for the white console is WB27T10150. One of these other colors will work the same as the bisque color console. I do not recommend trying the part WB36T10465.

The F0 and F7 normally indicate a failed control panel keypad. The normal troubleshooting to verify this failure is to disconnect electrical power to the range (shut off the breaker) and then to access the electronic control board. Unplug the console keypad ribbon connector on the electronic oven control board. Reassemble the oven and power it back up. If the fault code returns with the console keypad ribbon connector completely disconnected from the electronic oven control board, then the electronic oven control board will need to be replaced. If the code does not occur with the ribbon disconnected, then it is confirmed that the control console with keypad will need to be replaced.

I checked for a bisque colored substitute for your control console. I do not find one available. If you do not want to use a white or black console in place the bisque colored console, then the double oven would need to be replaced.

If you need more help, resubmit your question with additional details and the color of your oven.

Read More
Lyle W -
Sears Technician
March 09, 2009
Q:

Why is my Kenmore oven beeping after 12 hours? Why is the main burner on my cook top not turning?

A:

Usually when the control beeps it will flash an error code. Did you see an error code? According to the parts breakdown the touch pad & control are separate parts. Possibilities would be a defective control board or touch pad assembly.

It sounds like the valve stem is stuck inside the valve body. You can try a small amount of WD40 on the valve shaft to see if it will un-stick. You can use a pair of pliers to push & try to turn the valve stem. If your unable to get the valve unstuck I would recommend replacing the burner valve.

Read More
biker dave -
Sears Technician
July 28, 2008

Top Parts