Model #91148485890 KENMORE Built-In Oven, Electric

  • Control
    3 Results
  • Wire Harnesses And Components
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Door Lock
    3 Results
  • Opional Filler Trim Kit
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

limit switch/thermostat for fan 91148485890 Kenmore 27" built-in double oven

A:

Hello Christi. I am sorry to hear about this problem that you are having with your Kenmore oven.

 

I posted information about the cooling fan limit switches in the first image below. The second image shows the wiring diagram for your double oven. The limit switches for the cooling fans are designed to "close" electrically to turn on the cooling fans when the temperature reaches 210 degrees F. If those switches are not working, then they will need to be replaced. The part number for those fan switches is WB24K5033.  Be sure that you shut off the house circuit breakers for the oven to completely disconnect electrical power before accessing internal components and replacing parts.

 

If you need more help, reply with additional details and we will assist you further.

 

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services Oven Repair.

Read More
Lyle W -
Sears Technician
September 09, 2013
Q:

how to shut off 12 hour shut off feature on wall ovens.

A:

Good afternoon.... I can understand your need to override the 12 hour cut off mechanism. I did locate a link that will discuss your situation in greater detail. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help you in disabling that function and have a nice day.

Read More
Henry -
March 12, 2013
A:

I posted the procedure for disabling the 12-hour shutdown for those models in the image below. It is on page 14 of the owner's manual.  Here is a link for the owner's manual in case you need it: Kenmore 27" Wall Oven Model 911.4848 Owner's Manual.

 

If you need more help, let us know. 

Read More
Lyle W -
Sears Technician
March 13, 2013
A:

thank you for getting back with me. i have the manual and i have tried to cut off the feature like the manual says but the oven still cuts off after 12 hours. i have tried it numerous times. thank you.

Read More
dianne cooperman -
March 13, 2013
A:

Try to reset the control board in the oven by shutting off the house circuit breakers for the oven circuit. Leave the power for the oven off for 5 minutes. Reset the breakers to restore power. Set the clock. Try to shut off the 12 hour cut off feature again. Make sure that you follow all of the steps in that procedure. Be sure that you press the START button once you have the oven set for No Shutdown.

Read More
Lyle W -
Sears Technician
March 13, 2013
A:

we shut off the house circuit breakers for at least 5 minutes and then followed the manual and then hit start. after 12 hours of being on the oven again shut off. please let me know what i can do asap because i have a holiday coming up that i need the oven for. thanks

Read More
dianne cooperman -
March 14, 2013
A:

Since that feature is not working properly on the control, the electronic oven control board will probably need to be replaced. You can check to see if the individual buttons used in that procedure (Bake, Broil, Delay Start Time and Start) work properly. If they do, then the control panel is apparently okay. If the control panel is okay, then the electronic control board (part WB27T10282 for model 911.48485890) will need to be replaced. If the full model number of your oven is 911.48485890, then you can order that control board part WB27T10282 from this page: Electronic Control Board Part WB27T10282 for Kenmore Wall Oven Model 911.48485890 . If you have a different model, then you can look up the part number for your wall oven using the full model number to access the parts diagram on that same page provided above. If you want to replace that control board yourself, you can SHUT OFF THE HOUSE CIRCUIT BREAKERS FOR THE WALL OVEN to completely disconnect electrical power and then release the console to access the control board. Open the oven door and remove the screws on that underside of the control panel. You should then be able to lift up on the control panel and fold it down to access the control board. Close the oven door to a slightly open position so that you have a place to lay that control panel. Note the wiring locations on the existing control board (take a digital picture to document their location if necessary). Remove the wires and then replace the control board on the back of the control panel. Properly connect the wires and reassemble the oven. (Continued)

Read More
Lyle W -
Sears Technician
March 14, 2013
A:

If you are not confident that you can properly repair that failure yourself, then I recommend that you schedule service through this link: Sears Home Services Oven Repair .

Read More
Lyle W -
Sears Technician
March 14, 2013
A:

regarding the model number. the manual has two numbers on it the number you referenced being one of those numbers. but the number on the oven itself is the other number that is on the manual. 911 48489890. please respond asap. thanks

Read More
dianne cooperman -
March 14, 2013
A:

Hello Ms. Cooperman. Thanks for posting that model number. The control board for that model is the same as the one that I posted in the above response (part WB27T10282). The repair procedure is the same as well. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
March 14, 2013
A:

thank you for your help. have a good day.

Read More
dianne cooperman -
March 14, 2013
See more answers
Q:

Kenmore double 27" self clean wall oven model 91148485890 control panel not responding

A:

With the holidays approaching, you definitely want to have a working oven. I did some research and found a question that could help you with your oven. I also attached a link that will help you schedule an appointment to have your oven serviced on. I'm attaching both links below, Good Luck!!!!!!

Read More
Raquel F -
October 05, 2010
A:

The information you have already received is correct. There is a lockout feature on this control. I'm sending you a picture with instructions to correct it. If the control still won't function, it will need to be replaced. I hope this will help you.

Read More
Scott D -
Sears Technician
October 06, 2010
A:

The lockout feature did not work. It states on paperwork u attached that oven light button would still work but mine will not turn on from control panel. Oven light does turn on when u open oven. The control panel was just replaced 1 year ago. Do they go out that offen? Since the clock/oven light works I'm assuming it's getting power. Could it be one of the two switch/fuses that the oven has? Is there a way to tell if it is control panel vs switch/fuses?

Read More
Needsomehelpplease -
October 07, 2010
A:

There is a thermal limit for the lower oven but it has nothing to do with the touch pad function. There is no fuse for the top oven elements. Unfortunately there is no fuse in the oven circuit or for the touch pads. If the touch pads don't function, the control will need to be replaced. If you would like to have this checked, I'm listing a link below that you can access, to have a technician come out.

Read More
Scott D -
Sears Technician
October 07, 2010
A:

My GE JTP13/14 Stopped Working yesterday. The control panel does not respond; all the oven does is beep every few seconds. I have tried to "reset" it by flipping the circuit breaker off and on two to three times, for more than five minutes at a time and - no change. The oven light does come on when I open the door and when I use the switch on the front panel, and the clock does display (the wrong time). But, none of the controls work. Suggestions? I tried the "lockout" procedure described above - nothing. The oven is 18 yrs old. If it is the control panel, what does replacing that cost (labor inc.) and is it worth replacing or am I really in line for a new oven?

Read More
robert -
September 30, 2012
A:

Robert, this leads to a control board failure. The model listed is not complete and it brings up a couple of models. However, they both show to use the same control # RFR-CCS. This board lists for $149.99 not including shipping and tax. The cost for replacing it can vary in different areas. I suggest calling 1-800-469-4663 to get this estimate.

Read More
Scott D -
Sears Technician
October 01, 2012
See more answers

Top Parts