Model #91147862100 KENMORE Built-In Oven, Electric with Microwave

  • Body
    3 Results
  • Door Lock/wire Harness
    3 Results
  • Door
    3 Results
  • Microwave Enclosures
    3 Results
  • Microwave Door
    3 Results
  • Microwave Body
    3 Results
  • Microwave Control Panel
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Where can I get specifications and an installation manual for a Kenmore wall oven w/microwave Model # 911.47862100?

A:

Good afternoon..... I found an owner's manual as well. I will forward your question to an expert who will investigate the matter further and try to locate an installation manual and get back to you. You will hear from them within two business days if not sooner. Until you hear from us, have a nice day.

Read More
Henry -
January 04, 2013
A:

I do not have the exact installation guide for that Kenmore wall oven/microwave combo. I did find the specification and the installation guide for the GE equivalent model (that Kenmore model is manufactured for Kenmore by GE). I posted the KW rating and circuit breaker requirement (30 amps) in the image below. Here is a direct link for the installation guide on the GE equivalent model: Installation Instructions for GE Model JTP85W . That information should help you properly install the wall oven/microwave combo.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
January 07, 2013
A:

ok. I try that link. thanks

Read More
Bobby -
December 24, 2014
See more answers
Q:

How to Unlock Kenmore Microwave 91147862100.

A:

I am sorry you are experiencing difficulties with your Kenmore micro-wave. Most people do not know that micro-waves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. Door repairs and adjustments, even minor ones, can cause micro-wave leakage and a microwave shielding leakage test must be performed using a survey meter after any microwave service. I strongly suggest that you have this repair handled only by a qualified service technician. I have provided a links to your owner's manual ina PDF format to assist you and also to Sears Home Services if you decide to schedule service. If you think it may be cost effective to just replace the unit, I have also provided a link to the micro-wave section of Sears.com to price out what a replacement would cost.

Read More
James -
July 12, 2013
A:

Thank you for contacting ManageMyLife.com regarding the L on your Kenmore microwave. I see James provided you with some excellent safety information. I'm happy to help you today.

The instructions for disabling the control lock are located on page 25 of the owner's manual. If the control will not unlock, you can try resetting the unit by disconnecting it from the outlet or by switching off the designated circuit breaker for 2-3 minutes, then restore the power. If the reset doesn't help and the control will not unlock, more than likely the control board will need to be replaced.

This type of component failure will need to be repaired by a service technician since it involves an internal component on the microwave. Microwaves contain high-voltage components that can retain a lethal electrical charge of up to 2200 VAC -- even when the microwave is unplugged. Repairs and adjustments, even minor ones such as repairing or adjusting latches, can cause microwave leakage. A microwave shielding leakage test MUST be performed after any microwave service.

It is for these safety reasons that we are unable to guide you in microwave repairs and instead recommend scheduling service with a qualified service technician. You can schedule service online with Sears Home Services or by calling 1-800-4-MY-HOME.

We thank you for your understanding in this matter and hope we can help you with other questions and repairs in the future. Thank you for using ManageMyLife.com.

 

Read More
Korinna S -
Sears Technician
July 12, 2013
See more answers

Top Parts