Model #91147719200 KENMORE Built-In Oven, Electric

  • Control
    3 Results
  • Wire Harnesses And Components
    3 Results
  • Body
    3 Results
  • Door Lock
    3 Results
  • Door:911.47712200/4200/9200
    3 Results
  • Door: 911.47713200
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Electric Built-In Oven Model # 91147719200 91147719200

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your oven. Upon researching model 91147719200; since the control board we have pictured online does not match the board that is on your model I recommend that you contact Sears Parts Direct at 1-800-366-7278 so that we can research the problem.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
July 16, 2015
Q:

Kenmore oven fan will not shut off 91147719200 Kenmore Wall oven

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

what does code F9 mean 91147719200 Kenmore Wall oven

A:

Error codes on an oven could be confusing & frustrating when there's cooking to be done. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Yadira B -
November 22, 2012
A:

and the link is where?? none here

Read More
wfwiii -
November 22, 2012
A:

I can understand how upsetting it would be to have the oven continue to lock up. The F9 fault indicates the control has detected a problem with the door latch motor assembly or circuit. This will need to be checked by a technician. Try pushing inwards on the door and keep tension on it while starting a clean cycle. Start, then cancel a clean cycle. This should clear the error and allow the door to open.

If the error returns, I recommend a service technician check and make repairs. You can schedule a Sears technician here; Sears Home Services . The oven would need to remain unplugged until a technician can visit.

I hope this helps. Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
November 23, 2012
See more answers

Top Parts