Model #9114688810 KENMORE Ranges, Electric

  • Main Top
    3 Results
  • Oven Body
    3 Results
  • Door Lock
    3 Results
  • Oven Door
    3 Results
  • Wire Harness And Components
    3 Results
  • Backsplash 8058690
    3 Results
  • Vertical Trim Extension 8078690
    3 Results
  • Electric Grill Module Kit 4998640
    3 Results
  • Elec. Range/opt Elec Coil Mod Kit 4998521/4998621
    3 Results
  • Griddle Kit 4998550
    3 Results
  • Griddle/grill Cover Module Kit 4998510
    3 Results
  • Electric Hob Element Module Kit 4998530 & 4998630
    3 Results
Find part by diagram >

Question and Answers

Q:

model #9114688810 lights on panel go off and on functions of range ok changed eoc part# wb19x2665 oven works fine lights still go off behind panel each

A:

Sorry to hear about the issues with your Oven. I did a little research for you at Managemylife and found two expert answers to a similar question that may help until your expert can respond to your specific question. The links are attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices. I hope these links help.

Read More
James -
January 20, 2012
A:

Your details seem to indicate that the EOC (Electronic Oven Control) board in the console is loosing power when you set the oven. The EOC gets power from the relay control board (part WB27X519R). That relay control board is shown as KEY 35 in the parts image provided below. The physical location of that relay control board is probably on the back of the range. You could have a problem with the transformers on that relay control board that provide power for the EOC. You may need to replace that control board to fix this problem. You can order that part from the Sears PartsDirect website. Be sure that you shut off the house circuit breaker for the range to completely disconnect electrical power before accessing internal components.

If you need more help, reply with additional details.

If you get to a point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 23, 2012
See more answers
Q:

What does the F2 error code mean for a Kenmore Electric Range model number 911.4688810?

A:

What does the F2 error code mean for a Kenmore Electric Range model number 911.4688810?

The error code F2 indicates the oven is overheating and the oven sensor resistance is too high. Error code could also point to an oven sensor failure.

Read More
Korinna S -
Sears Technician
December 08, 2009