Model #9114658813 KENMORE Slide-In Range, Electric

  • Main Top Section
    3 Results
  • Optional Porcelain Pan And Chrome Ring Kit No. 8068400
    3 Results
  • Body Section
    3 Results
  • Door Lock Section
    3 Results
  • Oven Door Section
    3 Results
  • Electric Range
    3 Results
  • Optional Rear Main Top Filler 8028690
    3 Results
  • Optional Vertical Trim Extension 8068690
    3 Results
Find part by diagram >

Question and Answers

Q:

Our Kenmore oven has an error message of F3. The model number is 9114658813. What do I need to do.

A:

Receiving an error code on any appliance can cause a whole lot of frustration. I did some research on the code for you and provided a link to a similar question. I hope this will help you out with the error code and give you a better idea on the next step to take. The Expert will respond in more detail within 24 to 48 hours.

Read More
Julio -
July 31, 2012
A:

Thank you for your question and I understand your concern.

The "F3" fault code indicates an issue with the oven temperature sensor probe or the oven temperature sensor circuit. The oven sensor is located inside the oven cavity in the upper left or upper rear corner. It can likely be removed from inside the oven cavity and tested for proper resistance with an Ohm meter. The oven temperature sensor should measure approximately 1100 Ohms at room temperature. The oven temperature sensor #WB21X5301 can be ordered from Sears Parts Direct if needed.

I added a video showing how to test the oven sensor using an Ohm meter.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
August 01, 2012
A:

This started when I hit the oven's clean button and then cancelled the process. The oven flashed a door message. Once that stopped and I tried to use the oven for baking, it showed the F3 message for the the temperature sensor. Any thoughts that this might be connected to my cancelling the cleaning process?

Read More
Patty -
August 01, 2012
A:

Patty: It was not likely related. Ohm out the sensor and if it's not measuring approximately 1100 Ohms, replace the sensor. If it does, it's likely a faulty electronic oven control.

Read More
Joey S -
Sears Technician
August 03, 2012
See more answers
Q:

my Kenmore oven is burning my cakes and making them spilled out . My Kenmore stove is a pull out and tge model # is 911.4658813

A:

I love to bake cakes and understand how frustrating and what a waste of food having your oven burn your cakes. While you are waiting for an expert answer, I did manage to find two links that will provide you with more information about your problem. I suggest you resubmit your question perhaps adding a little bit more details like on what part top or bottom does your cake get burned on, and at what point does your oven overheat. I hope my links and suggestions are useful.

Read More
Joseph P. -
October 06, 2010
A:

Hi Joseph , I also have a Kenmore oven not exactly the same model hope this helped i learned the hardway with also burning cakes for almost 5-10 minutes when you turn your oven on for whatever reason its burners in the oven are higher then we set them to preheat the oven to our set heat you would think they would let you know mine beeps when the temperture i want is set but it takes longer than i ever expected it too. After i figured that out my cakes were good to go.

Read More
ursy -
October 06, 2010
A:

Before making any adjustments on the range controls you need to know the temperature of the oven.

The answers Joseph P and ursy sent have good information. I suggest you follow their instructions and if you still have a problem you can calibrate the oven temperature.

I recommend buying an inexpensive oven thermometer. Buy a thermometer with a bulb on it that measures the temperature. The thermometers with the pointers are not as reliable as the ones with a bulb. Place the thermometer in the center of the oven and set the temperature at 350 for testing. Leave the oven on for 30 minutes before reading the temperature on the thermometer.

I am sending you an image showing the procedure for calibrating the oven temperature. You can adjust the temperature 35 degrees cooler or 35 degrees warmer. If the oven temperature is more than 35 degrees off, the electronic control on the range is defective.

The part number of the electronic control for your range is WB19X255R, and the price is $219.99. If the control is bad I would go to www.sears.com and shop for a replacement range.

Read More
Jimmy K -
Sears Technician
October 07, 2010
See more answers