Model #91146565097 KENMORE Slide-In Range, Electric

  • Control Panel & Cooktop
    3 Results
  • Body Parts
    3 Results
  • Wire Harness & Wiring Components
    3 Results
  • Door
    3 Results
  • Door Lock
    3 Results
  • Blower
    3 Results
Find part by diagram >

Question and Answers

Q:

Instructions to Replace Bake Element for Kenmore Electric Side In Range Model # 911.46565097?

A:

When replacing a part in your oven, it is helpful to have step by step instructions to properly install the part. I was able to find instruction to replace the bake element for a similar model. I attached the link below. An expert will respond shortly. I hope this repair goes well.

Read More
Jackie S -
July 05, 2012
A:

That link for a previous answer that Jackie S. posted in the above response should help you complete that repair. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
July 09, 2012
See more answers
Q:

What are the correct temperatures for each setting on a Kenmore electric range?

A:

I understand your concern toward wanting to know what the proper temperature settings on your range are and I will be happy to help you. While you are waiting for an expert answer, I recommended you look in your owners manual for all of the proper settings. I found a link in where you can enter your model number and the owners manual will pop up: http://www.managemylife.com/mmh/owner_manuals. I hope my link is useful.

Read More
Joseph P. -
October 28, 2010
A:

Along with the others who have already responded, I also understand your concern about the burners not working properly on your range. Sam A. provided a good answer to your previous question. Here is a link for the answer that I am referring to: What are the correct temperature for each setting on a Kenmore electric range?

There are not any temperature ratings that your findings can be compared with.

The right back burner seems to be one that is significantly different than the rest.

I agree with Sam that replacing the burner switches will likely fix the problem rather than replacing elements.

According to your data, it is likely that the right rear burner switch will probably need to be replaced to fix this problem.

I hope that this information helps. If you need more assistance, reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
October 29, 2010
See more answers
Q:

What are the correct temperature for each setting on a Kenmore electric range?

A:

Unfortunately I am unable to give you this information but what I can give you is the manual for you to get the troubleshooting information on there. I have attached the link below for you to view and get the troubleshooting information there that you can all you have to do is type in your model number. I hope the link that I have provided you gives you some kind of guidance. http://www.managemylife.com/mmh/owner_manuals

Read More
Alina F. -
October 28, 2010
A:

Thank you for your question.

I can understand you concern for have all the burners working the same and giving an accurate heat setting.

I appreciate you detail and testing procedure.

I believe you are right that replacing the burners will not cure the problem.

� There is not a temperature chart for the surface burners.

� If he would replace the burner switches it should fix the problem.

� The switches control the percentage of time that the burner cycles on and off by the number setting on the knob and the load on the burner. This will vary between the large and small burner because of the wattage difference.

� The switch contact on the high setting is not a percentage, it is a locked on high setting. Any setting below high is a percentage of on and off. So turning the burner all on high does not check the switch properly.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
October 29, 2010
See more answers

Top Parts