Model #9114654091 KENMORE Slide-In Range, Electric

  • Top Section
    3 Results
  • Backsplash
    3 Results
  • Body Section
    3 Results
  • Wire Harness
    3 Results
  • Door Lock
    3 Results
  • Trim
    3 Results
  • Blower Section
    3 Results
  • Trim
    3 Results
  • Oven Door Section
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore slide in electric range

A:

I know how inconvenient it can be to have an error code on your range since this can keep your range from working properly and I will be happy to help. While you are waiting for an expert answer answer, I did manage to find a link that will provide you with some tips about what may be causing your problem. I hope my link is useful.

Read More
Dezeray S -
July 18, 2011
A:

Those links for previous answers that are posted in the above response correctly identify the cause of the F3 code as a problem with the oven temperature sensor circuit. You could have a bad sensor probe, a wire harness problem or a failed control board that is causing this problem. You can unplug the range and access the sensor probe as shown in the image below. Here is a brief video that shows how to test that component: Video: Oven Sensor Testing . Your sensor should measure around 1100 ohms at room temperature. If the sensor measures over 1300 ohms, I recommend that you replace it. You can order that part from the Sears PartsDirect website. The part number is WB21X5301.

Even if the sensor measures the proper resistance at room temperature, it still could be measuring high resistance at the higher oven temperatures. You may need to replace that component even if it measures okay.

If you need more help, reply with additional details and we will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
July 19, 2011
See more answers
Q:

Why does my electric range display an F4 sign and then cut completely off

A:

I know it can be very frustrating to have an appliance you depend on break down, especially your Kenmore Electric Range. Managemylife.com is always a great resource to find the answers to just about anything. I would suggest that you provide the model # and any other information that you think may help your expert respond with the best possible response. Continue this existing thread, just click on reply below and then add your information. This will speed up the process. I did do some research for you at Managemylife and found an expert answer to a similar question. This may shed some light on the problem until your expert can respond. The link has been attached below. Please remember your expert can walk you through a repair like this and can even help you order any required parts. I hope you can fix your unit utilizing Sears Technical experts.

Read More
James -
July 05, 2011
A:

The link is now attached

Read More
James -
July 05, 2011
A:

Slide-in electric range. Kenmore Model number 911.4654091

Read More
Bert -
July 05, 2011
A:

Thank you for your question and I understand your concern.

The "F4" fault code means a shorted oven temperature sensor. The oven temperature sensor is located inside the oven cavity. It can be found and removed from inside the oven cavity. The oven temperature sensor probe is located in the upper right or upper rear corner. Remove the screws and pull the sensor out and disconnect it. Check the resistance of the oven sensor with an ohm meter to confirm it's shorted. A good oven sensor should measure 1100 ohms at room temperature.

The oven temperature sensor is part #WB21X5301 which can be ordered from Sears PartsDirect if you find it shorted. I added a Youtube video showing how to test the sensor.

Read More
Joey S -
Sears Technician
July 06, 2011
See more answers

Top Parts