Model #9114652192 KENMORE Slide-In Range, Electric

  • Main Top Section
    3 Results
  • Optional Backsplash
    3 Results
  • Body Section
    3 Results
  • Wire Harness And Components
    3 Results
  • Door Lock Section
    3 Results
  • Optional Rear Main To Filler
    3 Results
  • Blower
    3 Results
  • Optional Vertical Trim Extension
    3 Results
  • Oven Door
    3 Results
Find part by diagram >

Question and Answers

Q:

kenmore stove model no 911.4652192kw8.7 door won't unlock, had to stop during cycle, pressed buttons and f2 came up, pressed more buttons, now door wont unlock

A:

Hi there, I understand how frustrating you must feel not able to use your Kenmore stove. I see that someone has asked a similar question to yours on Manage My Life's website. I have attached the link below. Hope this works!

Read More
Salina L -
July 06, 2010
A:

The "F2" fault code implies the oven temperature exceeded 590 degrees with the door in the unlocked position or it exceeded 990 degrees with the door locked. If the actual over temperature condition occurred it may have a failed control board. It could also have an open thermal switch or high resistance connection in the temperature sensor. (See image below.)

Based on your symptom I recommend calling a service technician to diagnose and repair your range or you may want to think about replacing the range rather that having it repaired.

I recommend calling 1-800-4MY-HOME or 1-800-469-4663 to set up a service appointment if you decide to have it diagnosed and repaired.

Read More
Joey S -
Sears Technician
July 09, 2010
A:

Should a 22year old kenmore be subjected to the high heat that occurs when cleaning an oven (9114652192)?

Read More
Elizabeth -
January 26, 2016
A:

Should a 22year old kenmore be subjected to the high heat that occurs when cleaning an oven (9114652192)?

Read More
Elizabeth -
January 26, 2016
See more answers
Q:

I'm looking for an owners manual for a Kenmore range model number 911.4658812? Thank you.

A:

I understand how important it is to have the owners manual to your Range. I have taken the time to research your model on the Manage My Life website and was not able to locate any information on your model, It may appear to be that your model is older the 10 years,which normally manuals are able to be located if no older than 10 years.You will receive a detailed reply from an expert within 24-48 hours.

Read More
Priscilla V -
August 24, 2011
A:

The manual for this model is no longer available. The manual for model 9114652192 is available. This range is very similar to 911.4658812. You may be able to use this manual for your range: Owners Manual .

If this manual does not work or your need more help, resubmit your question with additional details and we will try to help you further.

Read More
Bobby B -
Sears Technician
August 25, 2011
See more answers
Q:

Does anyone know what a F1 error code means on my Kenmore oven model 9114652192 ?

A:

I see you are getting an "F1" error code on your Oven. While you are waiting on an expert to answer your question. I seen that someone asked a similar question. I found this great link on error code "F1". I attached the link below. Hope this helps! Good luck.

Read More
Dezeray S -
September 14, 2010
A:

Thank you for your question.

  • It is a good idea to know what the code means so you can be an informed customer.

  • First try to cancel the error. If that does not work try disconnecting the electrical power at the circuit breaker and wait 1 minute a reconnect power to see if it goes away. I really hope this works.

  • The F1 code on your 911.4652192 is listed as a failed transistor on the control board. In some cases we have discovered it could be a stuck key on the key pad interface. However in most cases you will need to replace the control to repair the oven.

  • Because of the age of this range the control can only be rebuilt.There are no new controls in stock. It will need a technician to pull the control and send it off to a rebuild company and then returned for installation.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

  • I will give you a link to the rebuild company if you want to do this yourself.Core Centric Solutions And if you want to call them at 1.866.737.2244 and you can deal with them directly.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
September 14, 2010
See more answers