Model #91145569791 KENMORE Drop-In Range, Electric

  • Body Section
    3 Results
  • Door Lock Section
    3 Results
  • Wiring Components
    3 Results
  • Blower Section
    3 Results
  • Control Panel Section
    3 Results
  • Maintop Section
    3 Results
  • Door Section
    3 Results
Find part by diagram >

Question and Answers

Q:

re-assemble drop in range

A:

Replacing parts on a range may be difficult without the proper instructions. While you are waiting for an expert to respond I was able to locate some great information that could possibly assist you with your issue. I have added the link below. Hope this helps!

Read More
Yadira B -
January 23, 2013
A:

Thank you for your question and I understand your concern.

I do not understand the problem of getting the top back together. The top simply hinges up like a hood on a car to access and replace the control.

I added an image in a second reply. If you need further assistance, provide additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
January 24, 2013
A:

Steph; I added an image below of how to access the components and wiring.

Read More
Joey S -
Sears Technician
January 24, 2013
A:

Joey S -- thanks for the image... helps quite a bit... however I may have taken more of my range apart then necessary. do you have a image of components and wiring and how they fit together. I have included an image and am focused on items (6) and (15). Both are covers... (6) is the fill control cover.

Read More
Stephanie -
January 24, 2013
A:

Steph: I do not have a service manual. The last image I provided is all I have. The covers will need to cover the electronic oven control. I wish I could provide more help but you will need to use memory to figure out how those peices mount. All the pieces you listed will need to fit behind and over the control board. I do not have any further instructions. You will need to use the image you provided to see how they are positioned. Look to align the existing holes to the covers and match them up. Good luck.

Read More
Joey S -
Sears Technician
January 24, 2013
See more answers
Q:

why does my kenmore range display F5 model # is 911-45569791

A:

The F5 error code indicates that the control detects a problem with a relay drive circuit. Press Clear/Off and reprogram the control. If the F5 reappears, I recommend that you shut off the breaker for the range for 5 minutes and then reapply electrical power. Try to program the range again. If the F5 reappears then you likely have a failed control board. In rare situations, a wiring connection in the sensor or door lock circuit can cause this problem. I provided technical information below that will help you access the control board and check the wiring connections on these circuits. Be sure that you shut off the breaker to disconnect electrical power from the range before accessing internal components. You can use the information shown below to check the wiring connections on the sensor and door lock circuits. If you do not find a problem in these circuits then the control board will need to be replaced to fix this F5 problem. You can order parts from the Sears PartsDirect website. The part number for the oven control board is WB27T10417. If you need more help, resubmit your question with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
April 21, 2010
Q:

why does my kenmore range display F5 on screen

A:

The F5 error code indicates that the control detects a problem with a relay drive circuit. Press Clear/Off and reprogram the control. If the F5 reappears, I recommend that you shut off the breaker for the range for 5 minutes and then reapply electrical power. Try to program the range again. If the F5 reappears then you likely have a failed control board. In rare situations, a wiring connection in the sensor or door lock circuit can cause this problem. I provided technical information below that will help you access the control board and check the wiring connections on these circuits. Be sure that you shut off the breaker to disconnect electrical power from the range before accessing internal components. You can use the information shown below to check the wiring connections on the sensor and door lock circuits. If you do not find a problem in these circuits then the control board will need to be replaced to fix this F5 problem. You can order parts from the Sears PartsDirect website. The part number for the oven control board is WB27T10417. If you need more help, resubmit your question with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
April 21, 2010

Top Parts