Model #9114552092 KENMORE Drop-In Range, Electric

  • Control Section
    3 Results
  • Main Top Section
    3 Results
  • Body Section
    3 Results
  • Wire Harness And Components
    3 Results
  • Door Lock Section
    3 Results
  • Blower Section
    3 Results
  • Oven Door Section
    3 Results
Find part by diagram >

Question and Answers

Q:

how to disconnect bake element 9114552092 Kenmore Drop-in range, electric

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore range.

From the information you have provided above, I can understand the frustration of having your range malfunction, after researching model number 911.4552092. Below I have linked some inforamtion on how to get access to the element.

Click here.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
July 01, 2015
Q:

Our oven is not working, what can we do?

A:

The F1 error code indicates that a transistor has failed in the electronic oven control board. The control board will need to be replaced to fix this problem. The part number for the control board is WB27K5140R. You can order this part from the Sears PartsDirect website. According to the numbers you provided, the full model number of the range is likely 911.4552092 or 911.4552192. Check the opening of the oven for the full model number and verify the part number through the Sears PartsDirect website if necessary.

I recommend that you have a service technician replace this control board if you are going to repair the range.

Here is a link for the Sears Service website: Sears Home Services .

It will likely cost about $300 to repair this range. According to the model number, it is likely 15 years old. You may consider replacing the range instead of repairing it.

If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
February 17, 2010
Q:

What part do I need to change if my Kenmore range is beeping and displaying error code F1?

A:

The part number of the control board is WB27K5140R. We do not replace components on the control board nor would we know which resistor has failed. I recommend replacing the control board rather than attempting to troubleshoot the control board on a component level.

I added a link to Sears Parts Direct with the oven control board looked up for you. Click on "Oven ctrl" below to open link.

Read More
Joey S -
Sears Technician
October 30, 2009