Model #91141789890 KENMORE Built-In Oven, Electric

  • Control
    3 Results
  • Wire Harnesses And Components
    3 Results
  • Body
    3 Results
  • Door Lock
    3 Results
  • Fan Motor
    3 Results
  • Door
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

adjust oven temp. 91141789890 Kenmore 30" electric built-in oven

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is problems with the oven.
 
Glad to help out.   Im  looking at your Kenmore model number 911.41789890.

I am sorry for the bad news but also looked and found the manual is no longer available.   Was hoping to find it and send it to you free of charge by email.   

There is no thermostat in this oven.  The temperature setting is done by the clock control.   If that is your problem then it isn't too hard to fix.

I have it on the link below if you would like to order it.

Oven clock control per model  91141789890

If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
January 31, 2014
Q:

Programing codes

A:

I understand needing further information regarding your oven. I am happy to help. With the information you have provided, I was able to do some research. The F2 error code generally means an over or runaway temperature condition has occurred. One way to try to clear this is by disconnecting the power to the unit for a few minutes. You can do this either by unplugging the oven, or tripping the circuit breaker. I located some further advice from one of our other experts that I think will be helpful. Please click here to review.

I hope this will be helpful but please let me know if you need further assistance. If you would rather schedule for service, you can do so through this link: Sears Home Services .

 Thank you for using Manage My Life.

Read More
Desiree -
Sears Technician
October 11, 2013
Q:

Why does my Kenmore Oven model number 911.41789890 shut off while cooking?

A:

The control will often display an error code such as F2 if it detects a problem and will not continue to heat the oven. Look for this type of code in the display. If you see no error code, try the broiler to see if the oven broiler circuit will work properly. If the broiler has the same problem as the bake circuit, then you could have a problem with the temperature sensor probe or the electronic oven control board. You can try shutting off the breaker to disconnect electrical power and checking the resistance through the oven temperature sensor probe. Remove the screws that mount this sensor to the back wall of the oven. Carefully pull the sensor probe into the oven cavity until you can unplug the wire harness. There should be enough slack in the wiring harness so that you can unplug the probe. Unplug the probe but do not let wire harness shrink back through the inside back wall of the oven. Measure the resistance through the temperature probe. At room temperature, it should measure about 1100 ohms. If the resistance is high, this component could be causing your problems.

If the temperature sensor is okay, you could have a problem with the wire harness, the electronic control board or a loose wiring connection between the control and the element.

Unless you can find a problem with the sensor or see an error code, a technician will likely need to diagnose and repair this failure.

If you do not feel comfortable performing this task I would strongly suggest scheduling service at 1-800-803-6775 to have a technician diagnose and repair your oven.

Read More
Luis L -
Sears Technician
March 05, 2010

Top Parts