Model #91141485890 KENMORE Built-In Oven, Electric with Microwave

  • Body
    3 Results
  • Door Lock
    3 Results
  • Wire Harnesses/wiring Components
    3 Results
  • Door
    3 Results
  • Enclosure
    3 Results
  • Microwave Door
    3 Results
  • Microwave Body
    3 Results
  • Microwave Control Panel
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Equivalent part for a discontinued microwave door replacement?

A:

I am sorry you are experiencing difficulties with your Microwave. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. Door repairs and adjustments, even minor ones, can cause microwave leakage and a microwave shielding leakage test must be performed using a survey meter after any microwave service. I strongly suggest that you have this repair handled only by a qualified service technician. I have provided a link To Sears Home Services if you decide to schedule service. If you think it may be cost effective to just replace the unit, I have also provided a link to the Microwave section of Sears.com to price out what a replacement would cost.

Read More
Alina F. -
December 27, 2011
A:

Thank you for your question.

I am sorry you are having a problem with the microwave. I have searched for the part but we show the part to be no longer available. I have searched on the internet for the door. I was able to find a site that claims they have the part. Click here to be taken to that site. I recommend that you call them to be sure they have the part. The part number for the door is WB55T10033. If you are able to order the door, I recommend having it installed by a service technician. The reason is the microwave should be checked for leaks after the repair. You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 28, 2011
See more answers
Q:

Service Manual for Kenmore Built In Oven

A:

I know how important it is to have the owners manual for most home appliances so that you can troubleshoot any problem quickly. While you are waiting for your expert answer, I did manage to find the owners manual for your appliance and I have attached it in the link below. Please be patient and let the owners manual download and I hope my link is useful.

Read More
Joseph P. -
May 07, 2011
A:

I provided the technical data sheet for the oven portion of this combo in the images below (4 images). That information my be what you need.

NOTE: This information is intended for technicians. Follow electrical safely guidelines when using this data. Shut off the house circuit breaker for the oven when accessing internal components.

This oven combo contains a microwave. I do not recommend that you attempt to access or repair components in that microwave. Microwaves are inherently dangerous to service. They contain high voltage internal components that can retain a lethal electrical charge even when the unit is completely disconnected from electrical power. A microwave radiation shielding test must be performed on the microwave following any repair. I recommend that you have a service technician repair the microwave if you have a problem with that component in the oven combo. Here is a link for the Sears Service website: Sears Home Services .

If you need more help, reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
May 09, 2011
A:

Here is the 4th image.

Read More
Lyle W -
Sears Technician
May 09, 2011
A:

Thanks for this Lyle. I was actually interested in the Microwave section. Our Kenmore Microwave's turntable is automatically spinning whenever we open the door. It also seems to switch directions each time the door is opened. I had read elsewhere that this is typically due to a faulty door sensor/monitor, or interlock switch. I bought all three parts thinking it wouldn't be too risky to replace these since they presumably would be near the door/control panel, and nowhere near the high voltage transformer. However, you sufficiently scared me out of attempting this myself. I'll call a technician.

Read More
Mark Brown -
May 12, 2011
See more answers
Q:

How do I change the heating element in my Kenmore wall oven?

A:

To remove and replace the bake element:

  1. Disconnect the power supply to the wall oven by locating both circuit breakers inside your house breaker box dedicated for the wall oven and flip both circuit breakers OFF. NOTE: Make certain the power supply is OFF before removing the bake element.
  2. Remove the oven racks.
  3. Remove the two 1/4 inch hex head screws securing the bake element to the rear panel.
  4. Slide the bake element out enough to reach and disconnect the two electrical connections. Note: When you pull the electrical connection free from the bake element terminals make sure the loose wires do not recoil back through the opening in the rear panel or you may have to remove the wall oven in order to located and feed the wires back through the rear panel.
  5. Reverse the procedure to reinstall the new bake element.

Read More
Joey S -
Sears Technician
February 10, 2010

Top Parts