Model #91141185994 KENMORE Built-In Oven, Electric

  • Control
    3 Results
  • Center Space
    3 Results
  • Upper Body
    3 Results
  • Lower Body
    3 Results
  • Door
    3 Results
  • Door Lock
    3 Results
  • Wire Harness And Components
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


I have a Kenmore double wall oven Model #911-31185994. 91141185994 Kenmore Electric built-in double oven


I did some research on the unit and I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within two business days with detailed information. Thank you for using Manage My Life.

Read More
Joseph P. -
April 22, 2013

The F0 code indicates that you have a problem with the OFF key on your control panel or that you have a failure in the electronic oven control board. I posted the technical information for that failure in the image below. 


If you want to fix this problem yourself, you can shut off the house circuit breakers for the oven and release the console to access the control board on the back of the control panel. Open the oven door and remove the 3 screws that secure the control panel to the frame above the oven door opening. Lift the control panel up and then forward to release it from the top of the oven frame. Fold if forward and rest it on the top of the oven door (open the oven door slightly to the broil position so that it can support the control panel). Check the ribbon cable for the control panel that plugs into the electronic control board. If it is corroded, then you can clean it with electronic contact cleaner. You may not need to replace any parts if you clean that ribbon cable and then reassemble the control console. If the oven works and you have no more problems, then the failure was probably just caused by corrosion. If you still have that problem with the F0 code then you can check the control panel using a volt/ohm meter as shown in the image below. If you want to skip that process and replace the control panel, then that will likely fix your problem. Keep in mind that there is some risk involved with replacing the control panel without verifying the failure in that OFF key.


You can order parts from this page: Kenmore Built-in Oven Model 911.41185994 Repair Parts.  Be sure that you shut off the house circuit breakers for the range before accessing internal components and replacing parts.


If you need more help, reply with additional details and we will assist you further.



If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services Oven Repair. 

Read More
Lyle W -
Sears Technician
April 24, 2013
See more answers

Top Parts