Model #91141155590 KENMORE Built-In Oven, Electric

  • Control Panel Section
    3 Results
  • Door Lock
    3 Results
  • Door Section
    3 Results
  • Center Space Section
    3 Results
  • Upper Body Section
    3 Results
  • Wire Harness
    3 Results
  • Lower Body Section
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

replacement of control panel. 91141155590 Kenmore 30" electric built-in double oven

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your oven and do understand your frustration. Glad to help out. Im looking at your model number  91141155590 and you can send your own part for refurbishing, contact 866-737-2244 and is about a 2-3 week turn around. I hope this information helps. If you have further questions please resubmit your question for further information.
 
Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
June 26, 2014
Q:

No power or response from top oven 91141155590 Kenmore 30" electric built-in double oven

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when there are problems with the oven.

Glad to help out.   Im  looking at your Kenmore model number 911.41155590.

You say the upper oven isn't working but the lower oven is?   In the upper oven not coming on at all, I would check the upper and lower elements.   It is very probable that you just need to replace the Bake element in the bottom and the broil element at the top.  You can take these elements off and if you have an Ohm meter test them to see if they have continuity running through.

 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
October 18, 2013
Q:

How can I get the upper door unlocked on my Kenmore wall oven?

A:

Placing the upper oven into a clean cycle and start it. Let it heat up for 1 minute and then press the Clear/OFF button and wait for 1 minute to see if the door will unlock. If the door does not unlock then the control panel will have to be removed in order to access the door lock assembly or the wall oven will have to be pulled out and the top taken off in order to access the door lock assembly.

In order to remove the control panel the three screws located along the bottom of the control panel will have to be removed. You may have to use a 90 degree bent screw driver in order to remove them since the door will not open. See image below.

Read More
Joey S -
Sears Technician
January 26, 2010

Top Parts