Model #91141089992 KENMORE Built-In Oven, Electric

  • Control
    3 Results
  • Wire Harnesses/wiring Components
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Door Lock
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Have Kenmore oven, installed new oven control, same thing, start button will not work. All else does, what could it be?

A:

On something like this I suspect the control panel (touchpad) since you already replaced the control board. Control panel; WB36T10539 www.searspartsdirect.com

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
May 21, 2010
A:

I have a similar problem with a Kenmore 911.41089992. What would be the logical order of replacement? Control panel first, oven control second or the opposite? Thanks, bb

Read More
Robert -
November 27, 2012
See more answers
Q:

911.41089992 Technical specifications

A:

We received your question and an expert will respond with an accurate answer that will be very helpful to you. An expert will respond to your question within the next 24 to 48 hours by email. Thank You!!!!!

Read More
Raquel F -
August 09, 2010
A:

The installation guide for a single 30 inch wall oven can be viewed at the following link: Installation Guide .

This should have the information you seek concerning voltage and mounting requirement.

Read More
Fred M -
Sears Technician
August 11, 2010
See more answers

Top Parts