Model #91141069791 KENMORE Built-In Oven, Electric

  • Control
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Wiring Components
    3 Results
  • Door Lock
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

F3 code

A:

Error codes on appliances could be confusing & frustrating. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Yadira B -
January 11, 2013
A:

I can understand your frustration with replacing parts. The information for the F3 was correct, it indicates a problem with the oven temperature sensor probe or the oven temperature sensor probe circuit. At this point, I recommend checking the sensor circuit. The sensor could be faulty or it could have a loose or bad connection in the circuit. This video; Sensor test can help with the sensor test. Check the wiring from the sensor probe to where it connects at the oven control board. Make sure you check the connectors and for pinched wiring. If the problem continues, I recommend having a technician diagnose and make repairs. You can schedule a Sears technician here; Sears Home Services . Let me know what you find or if further assistance is needed. Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
January 11, 2013
See more answers
Q:

My Kenmore oven, model # 911-41069791 is giving an F1 error. What does that mean?

A:

On this error code you will need to unplug the ribbon connector & re-test. Please see the instructions from the service manual in the image below.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
May 08, 2010

Top Parts