Model #91140499890 KENMORE Built-In Oven, Electric

  • Control
    3 Results
  • Wire Harnessess And Components
    3 Results
  • Body
    3 Results
  • Door Lock
    3 Results
  • Door
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

wall oven 91140499890 Kenmore 24" electric built-in oven

A:

Thanks for the inquiry and for using SearsPartsDirect.com.

I am sorry to hear of the error you are receiving with the built-in oven, I know how frustrating it is to have that occur.

The "F0" fault code implies the Clear/OFF pad is shorted or a touch pad failure. If the code cannot be cancelled, unplug or disconnect the power supply from the range and then disconnect the keypad and then power it up. If "F0" ceases, replace the keypad/glass assembly; if "F0" is still present, replace the main oven control.

I added an image below with instructions how to access the control and glass panel. NOTE: Disconnect the range from the power supply before servicing. 

If by chance you are in need of the parts, I have included a blue link below that you may click on to be directed to the PartsDirect page to view and purchase the parts. If it turns out that you need the keypad assembly, number 1 on the diagram is for White and 1A is for Black. The control is number 16.

Kenmore Built-In Oven Parts for Model 91140499890

Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
November 20, 2013
Q:

KENMORE ELECTRIC WALL OVEN

A:

Having an error code on a range can be inconvenient and keep your appliance from working properly. While you are waiting for your expert answer, I did manage to find a link that will provide you with some good information to help you with your range error code. I hope my link is useful.

Read More
Joseph P. -
May 25, 2011
A:

The F7 indicates that you have a stuck key on the key panel or a problem with a relay on the electronic oven control board. There is a chance that a loose wiring connection or corroded contact on the ribbon cable could be causing this problem.

The normal trouble shooting for this failure is to shut off the house circuit breaker for the oven and access the control board in the console. You can pull the oven out and remove the access panel above the control (KEY 11 in the parts image below) or you may be able to release the control panel by removing the screws (KEY 170) on the top of the console. If you can access that control board, you can unplug the ribbon wire connection on the electronic control board that comes from the control panel. Carefully power the oven back up with that ribbon wire connection still unplugged from the control board. Wait for 5 minutes. If the F7 returns, then the electronic control board (part WB27T10276R) will need to be replaced. If the F7 does not return, then you will need to shut off the power and check that ribbon cable for corrosion on the contacts. You can carefully clean the contacts with a new pencil eraser if necessary. Plug the ribbon wire connection back into the control board and reassemble the oven. Power it back up to see if the F7 returns once the control panel is plugged back in. If it does, then you will need to replace that control panel. You can order the control panel (or the control board) from the Sears PartsDirect website.

This information should help you if you want to fix this problem on your own. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

If you need more assistance, reply with additional details and we will help you further.

If you decide to replace the oven instead of repairing it, you can view current oven models on the Sears.com .

Read More
Lyle W -
Sears Technician
May 26, 2011
See more answers
Q:

What does "F7" mean?

A:

The "F7" fault code indicates a possible stuck key pad or a stuck relay on the control board.

Determine if the problem is with the Key pad of Control by;

  1. Pushing Clear/Off pad.
  2. Disconnecting the ribbon cable connector from the control and wait at least 32 seconds to see if the code recurs. NOTE: This must be done with power to the control and I do not recommend doing this unless you have experience and knowledge of electricity and you feel safe and confident in doing so, otherwise I recommend calling a service technician to diagnose and repair your oven.
  • If code recurs, problem is in the control. Replace the control
  • If code does not recur, problem is with the Key panel.

I recommend calling a service technician to diagnose which has failed. In the mean time, flip the circuit breakers off designated for the oven to stop the beeping until the unit is repaired.

Read More
Joey S -
Sears Technician
August 31, 2009
A:

Thanks, MMH Expert_Joey S. That answer was very helpful. I'm calling a technician after I pound the controls a few times.

Read More
DalyCityHomeowner -
September 02, 2009
A:

I tested as Joey S described above and ended up cleaning and reseating the ribbon cable. It fixed the problem and I have not had a problem since. I noticed that when I reseated the ribbon cable i was able to push it further down in the slot than how it had come from the factory. I don't know if over time the cable began to unseat with use or if it just came from the factory that way. I have had the oven over 9 years now and this is the only problem I have ever had.

Read More
Dean -
September 11, 2010
See more answers

Top Parts