Model #91140465792 KENMORE Built-In Oven, Electric

  • Control
    3 Results
  • Wire Harnesses And Components
    3 Results
  • Body
    3 Results
  • Door Lock
    3 Results
  • Door
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Wall Oven Control Board wiring diagram

A:

Thank you for your question. I understand your concern about wiring the new control board. In most cases, unless the new control comes with instructions, the wires will connect the same as on the original. However, I'm attaching an image of the wire diagram for this oven below. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
November 04, 2013
A:

That's perfect. Thanks very much.

Read More
Greg -
November 04, 2013
A:

Greg, thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
November 05, 2013
A:

In the wiring diagram you have posted there is no reference to the gray wire in the oven for model #91140465792. The gray wire is suppose to connect to L1B on the circuit board. Do you have any recommendations for the connection issue?

Read More
Susan Martin -
November 18, 2013
A:

Susan, I have checked the diagram and the only wire shown to be connected to L1B is the black wire. Unfortunately, the exact diagram for your model range is not available any longer. However, I checked the diagram of several similar models and they were all the same. The only gray wire listed shows to be connected to the door lock switch. I'm attaching a picture of the wire schematic below. If your diagram is different it would be very helpful if you could send a picture of the diagram. If you would like to have a technician check this, you can call 1-800-469-4663 to schedule a tech to come out. I hope this will help you.

Read More
Scott D -
Sears Technician
November 18, 2013
A:

Scott, The issue is that there is no L1B connection in the new replacement circuit board that we ordered. I searched the gray wire back to another connection and it is connected to a black wire. The issue I am having is there is no connection terminal on the circuit board for the gray wire to connect. All the other wires are connected to the proper terminal on the circuit board per the wire diagram you had posted in the beginning. The new wire diagram that you sent me has a discrepancy in the wire placement from the first diagram you had. The difference is that in the first diagram it shows that OVL1 is connected to WHITE wire and OVL2 is connected to a BROWN wire. Now in the second diagram you sent the terminal OVL1 is connected to a BROWN wire and OVL2 is connected to a WHITE wire. I am assuming that the brown wire is a hot wire while the white wire is a neutral is that correct?

Read More
Susan Martin -
November 18, 2013
A:

Susan, according to the diagram you are correct about brown being hot and white is neutral. However, as stated above, your range is a different model and the control board WB27T10264 is a different control. The diagram # 31-13325 is also a different part number and these diagrams may be close but it would appear from your description that there is probably a difference. I have checked again and it's possible this diagram may still be available at Sears PartsDirect. I'm listing a number you can call and talk with a representative 1-800- 252-1698. I hope this will help you. If the diagram is not available, I would recommend having a technician check this. I hope this will help you.

Read More
Scott D -
Sears Technician
November 19, 2013
A:

Scott, The number you have provided was a complete and utter joke to say the least. No one has any answers to a simple question of providing a wiring diagram for the model number that we have provided. This is a disappointment in regards to the service industry of this country which has fell victim of out sourcing to other countries in the name of PROFIT. With no other option we will be returning the parts ordered due to lack of progress in the installation of the parts and we will NOT be ordering any other Sears related parts or items in the future.

Read More
Susan Martin -
November 20, 2013
A:

Susan, I'm sorry that I may have confused you. The part number listed # 31-13325 is the diagram for your range. It shows that it may still be available but you will need to check with a representative at the phone number listed 1-800- 252-1698. The diagram shown above pertains to a different model range. The wiring is apparently close but unfortunately, it appears there is a difference and the only way to determine, the correct wiring for your range, will be with the correct diagram. I hope the diagram is still available but if not, then a technician will be needed to check it. I hope this will help you.

Read More
Scott D -
Sears Technician
November 21, 2013
See more answers
Q:

How do I get a better wiring diagram for my Kenmore microwave oven?

A:

The best (and only) wiring diagram for this model of microwave is shown in the image below. This wiring diagram is intended for service technicians. Internal components repairs on microwaves should only be conducted by qualified service technicians. Internal capacitors in the microwave can retain a lethal electrical charge even when the unit is unplugged. A microwave radiation leakage test must be performed on the unit before it can be safely returned to service.

Read More
Lyle W -
Sears Technician
A:

I need the wiring diagram for a kenmore wall oven model # 91140465792. The problem i am having is there is a gray wire that is suppose to hook up to L1B and on the circuit board sent to me there is no L1B connector. What should I do? Can i leave it disconnected and the oven still work properly?

Read More
Susan Martin -
November 18, 2013
See more answers
Q:

Error Display

A:

Having an oven begin to give you error codes can be extremely frustrating and sometimes expensive t o fix. I did some research on the code for you and provided a link to a similar question and answer on our site. I hope this will give you a better idea on the next step to take until the Expert responds to your question in more detail within 24 to 48 hours.

Read More
Julio -
August 10, 2012
A:

Additional information: I pressed the Clear/Off button twice and turned the circuit breaker off. When I turned the circuit break on again nothing worked except the Clear/Off button. After about 5 minutes it started beeping beeping again and displaying the F7 error code. I pressed the Clear/Off button twice and before I could turn the power off again it started beeping and displaying the F7 code again.

Read More
Roelaux -
August 10, 2012
A:

The F7 error indicates a stuck key pad. It may also indicate a relay is stuck closed on the control board. This problem will require accessing the control board and removing the ribbon connector. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services . I hope this helps. If you have a few basic tools and feel comfortable with do-it-yourself I may be able to provide you additional information. You can reply with any additional details for further assistance.

Read More
Fred M -
Sears Technician
August 11, 2012
See more answers

Top Parts