Model #9114042591 KENMORE Built-In Oven, Electric

  • Control Section
    3 Results
  • Wire Harnesses And Components
    3 Results
  • Door Section
    3 Results
  • Body Section
    3 Results
  • Door Lock Section
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Replace door gasket Kenmore wall oven model 9114042591

A:

Repairs to a wall oven can be difficult simply due to the location. I understand your concern over safety so if you decide you would prefer to have a technician take care of this repair an option is to use the scheduler at Sears Home Services in the link below. The expert will review your model and respond with step by step instructions in 24-48 hours if not sooner.

Read More
Barbara H. -
July 23, 2011
A:

To remove the door from the oven, open the door to the broil position. Place your hands on the side of the door and lift straight up. The door will lift off the hinges.

Sometimes the door will be stuck and you have to lift pretty hard to free it. Don't use the door handle to lift with. The handle will break.

You have to remove the screws to take the door apart to replace the gasket. Place the door on a level padded surface to take it apart.

Read More
Jimmy K -
Sears Technician
July 25, 2011
See more answers
Q:

Why won't Kenmore wall oven broil nor bake?

A:

Core Issue: Why won't Kenmore wall oven broil nor bake?

If neither bake or broil element works the failure is likely a tripped circuit breaker or a failed oven control board. I recommend locating the two (2) house circuit breakers dedicated for the oven and reset both circuit breakers by flipping them both OFF and back ON 2-3 times and then check to see if the oven will heat.

If it continues to not heat the failure could be:

  • Voltage supply
  • Failed oven control board (most likely)
  • Burnt wire connection
  • Both elements burnt out

I recommend calling a service technician to diagnose and repair your oven if resetting the house circuit breakers dedicated for oven does not resolve the failure.

Read More
Maria M. - Personal Solutions Manager -
Sears Technician
November 19, 2009