Model #91140169690 KENMORE Built-In Oven, Electric

  • Control Section
    3 Results
  • Wire Harnesses&components
    3 Results
  • Body Section
    3 Results
  • Door
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Oven displays F2

A:

A range is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Jackie S -
January 06, 2012
A:

Thank you for your question and I understand your concern.

The "F2" fault code indicates the oven is getting hotter than it should, over 615 degrees. This could be caused by a shorted to ground bake element or a faulty electronic oven control. You oven will likely need a new electronic oven control and bake element.

You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
January 09, 2012
See more answers
Q:

Kenmore Oven - Want to give right info

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. I would suggest that you provide a little more information such as the make and complete model number of your product so your expert will be able to provide you the best possible answer. Just click on reply below where you can provide the additional information.

Read More
Alina F. -
January 05, 2012
A:

Thank you for your question and I understand your concern.

The "F2" fault code indicates the oven is getting hotter than it should, over 615 degrees.

Based on your symptom it sounds like the electric oven control will need to be replaced and possibly the bake element too. I recommend calling a service technician to diagnose and repair your oven.

You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
January 09, 2012
See more answers
Q:

Kenmore 24" Electric Built-In Oven Model Number 911.40169690

A:

I'm sorry to hear that you are having some difficulties with your Insert Name of Appliance Here. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Barbara H. -
January 05, 2012
A:

ok thanks

Read More
Herb -
January 05, 2012
A:

Thank you for your question and I understand your concern.

The "F2" fault code indicates the oven is getting hotter than it should, over 615 degrees. This could be caused by a shorted to ground bake element or a faulty electronic oven control. You oven will likely need a new electronic oven control and bake element.

I recommend calling a service technician to diagnose and repair your oven.

You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
January 09, 2012
See more answers

Top Parts