Model #9114012991 KENMORE Built-In Oven, Electric

  • Control Section
    3 Results
  • Wire Harness And Components
    3 Results
  • Door
    3 Results
  • Door
    3 Results
  • Body Section
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


I have older Kenmore build in oven 9114012991.


The digital displays can be helpful but also confusing. I was able to locate a similar question that explains this code. It may help while you wait for the expert. If a technician is needed, the Sears Home Services link below can help schedule.Both links are below.

Read More
Barbara -
July 28, 2013

What the F1 error code means is that you have to either replace the control board(ERC) or you have a bad touch pad. Here's how you can check:

  • Disconnect power to stove
  • Gain access to the back of the clock (electronic range control or ERC).
  • Unplug the touch pad ribbon connector from the ERC. This will be a flat wire approx. 1 1/2" to 2" wide.
  • Make sure everything is clear and will not short out when power is turned back on.
  • Turn power back on to stove.
  • Watch for the F1 and listen for the beep.
  • If you get the F1 and beep, replace the ERC.
  • If after approx. 30 minutes you do NOT get the F1 and hear the beep, replace the touch pad.

NOTE: Some models incorporate the touch pad and the clock as one part

  • If the code cannot be canceled, the electronic range control (ERC) has failed and it may need to be replaced.

The image below contains common error codes you might see on a GE range.  I hope this helps. 

Read More
Fred M -
Sears Technician
July 29, 2013
See more answers