Model #9113678853 KENMORE Slide-In Range, Gas

  • Main Top Section
    3 Results
  • Optional Rear Maintop Filler 8028890
    3 Results
  • Door Lock Section
    3 Results
  • Top Burner Section
    3 Results
  • Broiler And Oven Burner Section
    3 Results
  • Backguard Section
    3 Results
  • Body Section
    3 Results
  • Wire Harnesses And Components
    3 Results
  • Oven Door Section
    3 Results
  • Optional Vertical Trim Extension 8078690
    3 Results
Find part by diagram >

Question and Answers

Q:

What parts do I need to fix my range model 911.3678853 when the oven temperature and cook timer does not work?

A:

Make sure that your range has electrical power. If the stove top burners are igniting properly then you should have power to the clock control for the oven. If the burner igniters don't work then I recommend checking the breaker for the range. If it is plugged into an outlet, make sure that the outlet is working by plugging a small appliance or lamp into the outlet. If the power is hard wired to this range, then you will not normally be able to check the electrical power. A technician or electrician will normally need to check this issue. Here is a link for the Sears Service website in case you need it: Sears Home Services .

If the igniters for the burners are working then you will likely need to replace the clock control for the oven. (NOTE: A wiring failure could also cause this problem. Replacing the control without further diagnosis by a technician does involve some risk. It may not fix your problem if you do have a wiring failure that is preventing the control from powering up.) The part number for this control is WB19X255R. You can order this part from the Sears PartsDirect website. Replacing this part is not that easy. You would need to shut off the breaker and then access the control inside the console. There are no illustrated or written procedures that are available for this task. It is likely that you will need to remove screws from the top and bottom of the console to pull it out and access the control. If you are not able to access the control board yourself, I recommend that you have a service technician replace the oven control.

Read More
Lyle W -
Sears Technician
March 11, 2010