Model #91136759590 KENMORE Slide-In Range, Gas

  • Door Section
    3 Results
  • Main Top Section
    3 Results
  • Door Lock Section
    3 Results
  • Top Burner Section
    3 Results
  • Oven Burner Section
    3 Results
  • Optional Backsplash
    3 Results
  • Body Section
    3 Results
  • Wire Harness And Components
    3 Results
Find part by diagram >

Question and Answers

Q:

oven blows breaker; replaced ignitor 3 mos. ago

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Alina -
June 22, 2013
A:

Thanks for the information about your range/oven model 36655…, Sorry you are having a problem, I will be glad to assist you. Unfortunately the model number you provided is incorrect or incomplete; I am unable to retrieve any data using that number. The complete model number will be needed to research your range/oven. I will only be able to provide a general answer at this time. Based on your description, it is unclear if the breaker is being tripped when you first turn the oven on or if it trips after being on for a while. If it is tripping after operating for a while I would first consider changing the wall outlet, GFI circuits weaken very easily and are generally not recommended for use with major appliances. I hope this helps, if you need more help reply with a complete model number off the range/oven and added details and I will be happy to respond.  If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services. Ron H.

Read More
Ron H -
Sears Technician
June 24, 2013
A:

Hi. The model number is 911.36759590, serial number 6A220653(Q or R - hard to read). Based upon your first answer, we plugged the oven into a different receptacle in the house with no GFI and it worked as it should. However, we have plugged it into the GFI for 20 years, and now it is tripping it. So, we now suspect it is drawing too much power which could mean there is a short somewhere possibly in the circuit. Could be dangerous and/or cause a fire? Are you able help us troubleshoot this?

Read More
John -
June 24, 2013
See more answers

Top Parts