Model #9113652190 KENMORE Range (gas)

  • Main Top Section
    3 Results
  • Backsplash-8059090
    3 Results
  • Oven Body Section
    3 Results
  • Broiler And Oven Burner Section
    3 Results
  • Top Burner Section
    3 Results
  • Door Lock Section
    3 Results
  • Oven Door Section
    3 Results
  • Wire Harnesses And Options
    3 Results
  • Opt Rear Main Top Filler 8028790
    3 Results
  • Opt Vert Trim Extension 8068690
    3 Results
Find part by diagram >

Question and Answers

Q:

how do i test the temperature sensor

A:

I'm sorry to hear that you are having some difficulties with your Range. I did some research for you at Managemylife.com and found expert answers to a similar question that may help until your expert can respond to your specific question. The link is attached below. I hope these links provided assist you.

Read More
Priscilla V -
November 03, 2011
A:

You can check the oven temperature sensor probe using a volt/ohm meter as shown in this video: Oven Sensor Testing . That sensor should measure around 1100 ohms at room temperature. The first image below shows how to access that temperature probe. Be sure that you unplug the range or shut off the house circuit breaker for the range to completely disconnect electrical power before accessing internal components. If that sensor is okay, you can plug it back in and measure the resistance of the entire sensor circuit from the clock control board using the information shown in the second image. Be sure that electrical power is disconnected from the range when accessing the control board and other internal components.

If that sensor needs to be replaced, you can order that part from the Sears PartsDirect website. The part number for the sensor is WB21X5301. Here is a direct link for that part: Sensor .

If you need more help, let us know.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
November 04, 2011
See more answers

Top Parts