Model #9113548691 KENMORE Drop In, Gas

  • Control Panel
    3 Results
  • Main Top
    3 Results
  • Burner Section
    3 Results
  • Body Section
    3 Results
  • Oven Door Section
    3 Results
  • Oven Door Section
    3 Results
Find part by diagram >

Question and Answers

Q:

I need to replace my igniter in old kenmore drop gas oven 9113548691

A:

Thanks for the inquiry and for using SearsPartsDirect.com.

You are exactly right on the part number, WB2X9154 is the one you would need for this model. Once you undo the two mounting screws, I would recommend replacing one wire at a time so they don't get mixed up. Just undo the wire nut, and twist the wire ends from the new ignitor wire and the connector wire together and put a new wire nut on. Do the same thing to the other wire and resecure the ignitor's mounting screws to the mounting bracket. It's a pretty straight forward install to perform. Just be cautious when handling the new ignitor that you don't touch the ceramic portion with your skin, the oil will cause the ignitor to fail prematurely.

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, click here to be directed to the page to set up service. 

If you haven't ordered the new ignitor yet, I have provided a blue link below that you may click on to be directed to the PartsDirect page to view and purchase the new ignitor.

Ignitor for Model 9113548691

Let us know if you have any further questions and thanks for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
November 05, 2013