Model #91132359590 KENMORE Counter Unit, Gas

  • Main Top
    3 Results
  • Burner
    3 Results
  • Wire Harnesses And Components
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


The ignitors on my gas cooktop are sparking yet the knobs are all shut off. Can you help.


Model # 91132359590 Serial # 51727870 Part # ? 326B1096P003

Read More
Paul -
October 07, 2013

Thank you for your question and I understand your concern. There is a switch mounted over each one of the surface burner valves and if any one shorts or closes it will complete the line voltage to the spark module and cause the surface ignitors to begin sparking. Generally speaking, if any moisture/water or liquid happens to boil over or spill onto any of the burner valves, it can cause the ignitors to begin sparking. If there was spillage, it should evaporate and quit sparking. Also, if one of the switches happens to lift up off the burner valve, the stem will no longer turn the switch and could possibly start sparking if the switch was on the verge of closing. You can likely remove the burner knobs and look to see if all 5 switches appear to be in the same position or not. If all the knobs are completely off, the most likely problem will be a short in one of the switches. I would recommend having a technician make this check to determine, which switch may have failed. I'm listing a site you can access, to schedule a tech to come out. Here is a link for the website: Sears Home Services. I hope this will help you. If you would like more assistance, reply to this thread and I will assist you further.

Read More
Scott D -
Sears Technician
October 09, 2013
See more answers

Top Parts