Model #91132289890 KENMORE Counter Unit, Gas

  • Main Top
    3 Results
  • Wire Harnesses And Components
    3 Results
  • Burner
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

What parts do I need to convert from propane to Gas? 91132289890 Kenmore 30" gas counter unit

A:

Thanks for the inquiry and for using SearsPartsDirect.com. 

In order to convert the cooktop back to natural gas, you will need to replace the orifices in the burners. It appears three of the burners (medium) will use orifice part number WB28K5095 and the other burner (small) will use orifice part number WB28K141.

For convenience, I have included blue links below that you may click on to be directed to the PartsDirect site to view and purchase the needed parts.

Medium NG Orifices for Model 91132289890 (QTY 3 Required)

Small NG Orifice for Model 91132289890

Sears highly recommends having a licensed Gas Service Technician perform the conversion on the cooktop. 

Let us know if you have any further questions and thanks for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
November 02, 2013
Q:

Kenmore cook top 911.32289890 will not light

A:

I understand that your Kenmore cook top is not lighting. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
November 10, 2012
A:

Your details seem to indicate that the spark igniters are all ticking properly. I recommend that you clean the burner heads. The image below shows how to remove the burner heads on your cooktop. Thoroughly clean all of the ports on those burner heads. Check the igniter electrodes for spills that may interfere with the ignition sparks. Be sure that you properly reassemble the burners. Allow the electrodes and the burner heads to dry completely. Check to see if this fixes your problem. If you need more help, reply with additional details and we will try to assist you further.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
November 13, 2012
A:

Thanks. I will do that. But doesnt it seem odd that all burners would stop work at the same time if it only needed cleaning. The clicking sould is not the same as before it a faster duller click.

Read More
vonda -
November 13, 2012
A:

Since that clicking sound has changed, you could have a problem with the spark module (part WB13K25). A wiring failure or a voltage supply problem could also prevent the spark module from working properly. If you have that cooktop plugged into an electrical outlet, then you can test that electrical outlet by plugging a lamp or small appliance into the outlet to make sure that it is working properly. If the cooktop is direct wired to a power supply, then it will be difficult to check the power supply. If you verify that the power supply is okay, then you will probably need to replace that spark module. You can order that part from this page: Spark Module for Kenmore Cooktop Model 911.32289890 . Unplug the cooktop or shut off the house circuit breaker before accessing internal components if you replace that spark module yourself. I posted some parts images below that may help you access and replace that component. The spark module is Key 318 in the second image. You may be able to access it from the top of the cooktop by removing a burner bowl. I hope that this additional information helps. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
November 14, 2012
A:

thanks. that worked

Read More
vonda -
November 16, 2012
See more answers
Q:

Kenmore stove top gas. One burnner will not ignite, why?

A:

While preparing a home cooked meal it can be a hassle when your unable to use all the burners for your stove top. I was able to find a couple links that include great information for this issue. I attached the links below. I hope this helps.

Read More
Jackie S -
April 16, 2012
A:

Since all of the other burners work, this indicates that you probably have a bad valve switch on that burner. I assume that the igniters are not ticking when you turn that knob to the "light" position. The valve switch is part WB24T10071. You can order that part from this page: Valve Switch for Kenmore Cooktop 911.32289890 .

Unplug the cooktop or shut off the house circuit breaker before accessing and replacing that valve switch. Also shut off the gas supply to the cooktop. To access that burner switch, you will normally need to pull the cooktop out of the counter and remove the burner box below the cook top. If you need more help, reply with additional details.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
April 17, 2012
See more answers

Top Parts