Model #91132080100 KENMORE Counter Unit, Gas

  • Cooktop
    3 Results
  • Burners
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Knob will not turn and no Clicking 91132080100 Kenmore 30" gas cooktop

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when there is trouble with the cooktop.

Glad to help out.   Im  looking at your Kenmore model number 911.32080100.

On a gas cooktop when you don't hear the "Clicking Sound" then you just need to replace the ignitor switch.   It isn't that difficult to replace.

ignitor per model 911.32080100 

 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
October 29, 2013
A:

Hi thanks, but that did not answer the question. The knob will not turn is the question

Read More
Mike -
October 30, 2013
A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
Sorry that I stated it wrong in what I read and thought I understood.   You will need to replace what they call on this one per your model.  It is the item that will turn your knobs. "the gas valve".  The part number is wb21k5010.
 
 If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
October 31, 2013
A:

Hi Larry, I replaced one of the igniters (seems there are two) but that did not result in any clicks. Everything still quiet. What else can I look at. I cannot find any schematics or anything to help with diagnosis. Also, I ordered the gas valve as well. Any instructions on its installation? Thanks

Read More
Mike -
November 11, 2013
A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

Mike, very sorry about the problem.   It is usually a given when the switch/ignitor doesn't click that all you have to do is replace the ignitor.

Being that it is just one or two ignitors/switches this should of done it.  If all the ignitors werent working or clicking then it would be the spark module.  There is an ignitor under each burner valve.  With another set of eyes we found the part.  It is called the gas valve switch.  There is the gas valve and then the gas valve swtich.  You need the switch.

gas valve switch per model 911.32080100 

 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
November 12, 2013
A:

Hi Larry, Appreciate you getting back to me so soon. There are 4 of those switches and I find it hard to believe all 4 are bad. Seems like replacing one switch is not going to do any good, as the other three have not been changed, unless there is some sort of serial flow?

Read More
Mike -
November 12, 2013
A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

Hi Mike and sorry there is still confusion.   Sorry that I am not answering correctly.   If all 4 burner switches are bad on your range then you need to get the  spark module.  If only one is bad and you don't hear the click (on just the one or two burners) then you need to get that gas valve switch that I gave yesterday to you.

I am very glad to help out.  Sorry if I explained it wrong.  Here is the part number below for the spark module to do the top burners.

spark module for the range 911.32080100 

 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com

 

Read More
Larry L -
Sears Technician
November 13, 2013
See more answers
Q:

the gas will not ignite and you do not hear the clicking sound 91132080100 Kenmore 30" gas cooktop

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when there is trouble with the range.

Glad to help out.   Im  looking at your Kenmore model number 911.32080100.

That is very simple when you have a gas range that is not igniting and you don't hear the clicking sound.   That means you either need an ignitor.   If you heard the clicking sound and it wont ignite then you would need the spark module.   So here in the link below is the ignitor.

ignitor per model 911.32080100 

 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
October 25, 2013

Top Parts