Model #91130469690 KENMORE Wall Oven, Gas

  • Control Section
    3 Results
  • Wire Harness And Components
    3 Results
  • Burner Section
    3 Results
  • Door Lock
    3 Results
  • Body Section
    3 Results
  • Door Section
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore gas wall oven won't ignite. 91130469690

Q:

Kenmore oven not maintaining temperature 911.30469690

A:

I understand that your Kenmore oven is not maintaining its temperature. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
March 21, 2013
A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
James -
Sears Technician
March 22, 2013
See more answers
Q:

Gas built in oven #911.30469690: Unit has a light inside, however control accepts zero commands. Thanks for a specific process to fully examine

A:

I'm sorry to hear that you are having some difficulties with your Gas Built-in Oven. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
James -
November 08, 2011
A:

I recommend that you shut off the house circuit breaker for the oven and access the clock control board as shown in the second image below. Check the black and white wires on that control board that are traced in red and green on the wiring diagram in the first image. If that wiring is okay and the display on the control will not light up, then the clock control board (part WB27T10267) will need to be replaced. You can order that part from the Sears PartsDirect website. Here is a direct link for that part: Electronic Clock Control Board . Be sure that you shut off the house circuit breaker for the oven before accessing and replacing this control board.

If the control does light up, then you could have a problem with that ribbon wire connection or the control panel. The information in the second image below will help you check that component.

These tips should help you with this oven failure. If you need more assistance, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
November 09, 2011
See more answers