Model #9113042590 KENMORE Wall Oven, Gas

  • Control Section
    3 Results
  • Wire Harnesses
    3 Results
  • Body Section
    3 Results
  • Burner Section
    3 Results
  • Door Lock
    3 Results
  • Door Section
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why won't my wall oven heat even though I replaced the control valve and glow plugs?

A:

Your symptoms indicate that you either have a wiring failure or a failed electronic oven control board. I assume that the glow bar igniters are not glowing. Properly diagnosing this failure would involve a voltage check on the control board. I do not recommend conducting this type of voltage check yourself. Service technicians should only conduct this type of live voltage check. You can check for wiring failure between the control board and the igniter. If you want to take a chance on replacing the control board without checking the voltage, this may fix your problem.

Read More
Lyle W -
Sears Technician