Model #9113022990 KENMORE Wall Oven, Gas

  • Control Section
    3 Results
  • Wire Harnesses
    3 Results
  • Burner Section
    3 Results
  • Body Section
    3 Results
  • Door Section
    3 Results
  • Door Section
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I have a kenmore wall oven the model # is 911302022990 and every time. we turn it on it gives me f4 error 9113022990 Kenmore Gas oven

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Kenmore wall oven model 9113022990. I am so sorry you are getting the F4 code. I will be happy to help you with this.

Safety Warning: Disconnect the power supply to the range before beginning any tests to prevent the risk of electrical shock.

The F4 code indicates that the clock control board detects a problem with the oven temperature sensor circuit. You can check the resistance through that oven temperature sensor circuit from the wiring connections on the clock control board in the console.  Unplug the connection from the clock control board and measure the resistance through that sensor circuit. It should measure around 1100 ohms in most ranges. The resistance through that circuit should be the same as the resistance measured directly at the sensor probe. If not, then a wiring harness failure is probably causing that F4 code. The most vulnerable part of that harness is the disconnect plug at the sensor.If that resistance through the sensor circuit is okay as measured from the clock control board, then that clock control board may need to be replaced.

If you are not comfortable conducting these tests, you can set up service atwww.SearsHomeServices.com or by calling 1-800-469-4663. I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
November 04, 2014
Q:

I have a kenmore wall oven the model # is 911302022990 and every time. we turn it on it gives me f4 error 9113022990 Kenmore Gas oven

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Kenmore wall oven model 9113022990. I am so sorry you are getting the F4 code. I will be happy to help you with this.

Safety Warning: Disconnect the power supply to the range before beginning any tests to prevent the risk of electrical shock.

The F4 code indicates that the clock control board detects a problem with the oven temperature sensor circuit. You can check the resistance through that oven temperature sensor circuit from the wiring connections on the clock control board in the console.  Unplug the connection from the clock control board and measure the resistance through that sensor circuit. It should measure around 1100 ohms in most ranges. The resistance through that circuit should be the same as the resistance measured directly at the sensor probe. If not, then a wiring harness failure is probably causing that F4 code. The most vulnerable part of that harness is the disconnect plug at the sensor.If that resistance through the sensor circuit is okay as measured from the clock control board, then that clock control board may need to be replaced.

If you are not comfortable conducting these tests, you can set up service atwww.SearsHomeServices.com or by calling 1-800-469-4663. I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
November 04, 2014
Q:

Kenmore 911.3022990 Wall Oven

A:

I understand that you are having problems with your wall oven working. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina F. -
February 25, 2012
A:

The wiring diagram for that oven is shown in the first image below. Since the light works, that circuit that is traced in yellow is apparently okay. There is a chance that you have a wiring failure in that circuit traced in red that provides voltage to the clock control board. You can shut off the house circuit breaker for the oven and check those wiring connections on that clock control board. The second image shows those connections on the back of that clock control board and the third image shows how to access that component. If the wiring connections are okay, then you will probably need to remove that clock control board and send it to Core Centric Solutions for repair to fix this problem. A technician would normally verify that you have voltage going to the control board through those wires. If you are comfortable with checking that live voltage, you can verify that the control board is getting power before removing it for repair. NOTE: Use extreme caution if you check the live voltage yourself. Wear proper protective equipment (electrical safety gloves and safety goggles) when checking that live voltage. Shut off the circuit breaker to disconnect electrical power as soon as live testing is completed .

If the control board is getting power but will not light up then it will need to be repaired. The replacement part is no longer available. That is why it must be sent to Core Centric Solutions for repair. Here is a link for that website that has contact information for that company: CoreCentricSolutions.com . The cost of a control board repair is normally around $150.

These tips may help you fix this oven problem. If you need more assistance, reply with additional details.

If you get to the point where you need to have a service technician diagnose and repair this oven failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
February 27, 2012
See more answers