Model #91130158590 KENMORE Wall Oven, Gas

  • Controls
    3 Results
  • Wiring Harness
    3 Results
  • Burner Section
    3 Results
  • Door Section
    3 Results
  • Body Section
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


My oven will not heat up 91130158590 Kenmore 24


F3 Error on Kenmore Gas Oven Purchased in 1996 91130158590 Kenmore 24" gas built-in oven


Thanks for the inquiry and for using

I am sorry to hear about the F3 error you are receiving on the range, especially after just replacing the oven temp sensor.

The F3 error code indicates that the oven control board detects an issue with the oven sensor circuit. Usually it's recommended to test the oven temp probe sensor for resistance to see if it's the issue. It would have a resistance measurement of 1091 ohms plus or minus 5.9 at room temperature. However, since you've replaced the probe and no change, it's most likely an issue with the electronic control board, part number WB27T10327. 

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, you can call 1-800-349-5071, or click here to be directed to the page to set up service.

If by chance you would need to purchase the oven electronic control for the unit, I have included a blue link below that you may click on to be directed to the PartsDirect page to purchase the part.

Electronic Control Board for Model 91130158590

Let us know if we can be of any further assistance and thanks for using  

Read More
Jeff Wallace Sr -
Sears Technician
November 25, 2013