Model #905 PHONE MATE Telephone Equipment

  • Unit Assembly
    3 Results
  • Unit Assembly
    3 Results
  • Mechanism Unit
    3 Results
  • Mechanism Unit
    3 Results
  • Amplifier Unit
    3 Results
Find part by diagram >

Question and Answers

Q:

Bosch downdraft vent operation instructions DHD905AUC Bosch Downdraft

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about the operating instructions for your Bosch downdraft vent model DHD905AUC. Congratulations on your new home. I am so sorry the previous owner didn’t leave you the owner’s manual for the vent. I will be happy to help you with this. I have included the link below for the Owner’s Manual. Unfortunately it doesn’t provide much information on the controls. Please see page 4 for the Use and Care information. 


I checked Bosch’s database to see if I could find you additional information. Your model number was not recognized on their site. I have provided their contact information in case you need it.


I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
March 30, 2015
Q:

Installing stovetop on GE profile JS905B0K1BB

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your range top and I do understand your frustration. Glad to help out. I'm looking at your model number JS905BK1BB and click here for the directions from the service manual. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
February 10, 2015
Q:

GE Slide In Range #JGS905SEK2SS

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Yadira B -
August 07, 2013
A:

Thanks for contacting manage my life about your range/oven model JGS905SEK2SS, I will be glad to assist you with this question. Sorry you have encountered a problem with the igniter connector. Unfortunately after researching I find that the manufacture does not provide a replacement wiring harness for the igniter or even the complete range. The igniter does come with the connector end (but that only give you half of the entire connection. )The solution for your issue would be to hard wire the igniter with ceramic wire nuts (available at most hardware stores.) This would insure a secure connection and be trouble free. I hope this helps, if you need more assistance reply with added details and I will be happy to respond.  If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services. Ron H.

Read More
Ron H -
Sears Technician
August 08, 2013
A:

after replacing the igniter my stove still don't light what else controls the igniter

Read More
STEVE -
December 22, 2014
See more answers