Model #900116840 CRAFTSMAN Sander

  • Sander Assy
    3 Results
Find part by diagram >

Question and Answers

Q:

where can i buy replacement sandpaper for my #900116840? 900116840 Craftsman Sander

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
You are right, the sanding sheets for this model of sander are pretty difficult to track down. I was able to locate some on Craftsman's site that look like they will work. They are described as the 8 hole sanding sheets. 
For convenience, I have included a blue link below that you may click on to be directed to Craftsman.com to view the results from my search. You will just have to go through the results to find the matching sandpaper needed.

SandPaper Results from Craftsman.com

Hope this helps and thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
April 26, 2014
Q:

how do i remove the dust canister from my Cyclone 4in1 sander model 900.116840

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Jackie S -
October 27, 2011
A:

Thank you for your question on the broken piece on the dust collector.

If you cannot get the part out by shaking it you will need to remove the screws on the one side of the housing half and take to cover to retrieve the broken part.

Do you have the parts pictorial of the parts for the sander?

If you have sent pictures they did not come through.

Please resend

Please let me know what you found out.

Sam A.

Read More
Sam A -
Sears Technician
October 27, 2011
A:

Thank you for your answer. I don't have a picture of the parts, I just have the Manual. however, I was able to remove the dust canister and found that a part is not broken off. Because the canister was loose and my sander would only humm, I thought a broken part fell into the blades. After removing the dust canister, I removed the sanding base and the black housing that covers the blades. With these parts removed, the blades will now move easily, and they would not move before, thus the humming sound earlier. I did not find any obstruction, except of sanding dust, I cleaned and put it back together. Works great now. I am puzzeled, but so thankful it is not broken. I appreciate your reply, and will ask for assistance again before I pay for a repair. Linda

Read More
linda -
October 28, 2011
See more answers

Top Parts