Model #87518845 CRAFTSMAN Air-drive tool

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

i have a 1/4 drive airratchet by craftsman and it turns but when i put it on the nut it stop, and i can hold the drive part and it stops, can you tell me whats

A:

Manage My Life is a great website to speak directly to an expert who can help you every step of the way to solving the problem you are having. An expert shall have an answer to your question within 24 to 48 hours. Have a great day.

Read More
Alina F. -
August 26, 2011
A:

Thank you for your question.

I am sorry you are having a problem with the ratchet. A few different parts can cause the problem you are having. If the rotor blades on the motor are worn or stuck, the ratchet will turn with no load but will not under a load. If the gears are striped it would do the same thing. I recommend taking the ratchet part and inspect the parts. The area that you work in has to be clean and lay the parts out in order you take them out. After the ratchet is apart, clean and inspect all of the parts. Make sure the rotor blades move free in the rotor and the gears are fine. If everything looks ok, oil the parts and reassemble the ratchet. If it still will not work, you might consider purchasing a new ratchet instead of repairing the old one. The cost to repair could run as much as new. click here to see the new models.

Here is a link to order any parts you need. Sears Parts Direct .

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
August 28, 2011
A:

Thank you for your question.

I am sorry you are having a problem with the ratchet. A few different parts can cause the problem you are having. If the rotor blades on the motor are worn or stuck, the ratchet will turn with no load but will not under a load. If the gears are striped it would do the same thing. I recommend taking the ratchet part and inspect the parts. The area that you work in has to be clean and lay the parts out in order you take them out. After the ratchet is apart, clean and inspect all of the parts. Make sure the rotor blades move free in the rotor and the gears are fine. If everything looks ok, oil the parts and reassemble the ratchet. If it still will not work, you might consider purchasing a new ratchet instead of repairing the old one. The cost to repair could run as much as new. click here to see the new models.

Here is a link to order any parts you need. Sears Parts Direct .

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
August 28, 2011
See more answers