Model #875 RYOBI Trimmer

  • Boom/trimmer Parts
    3 Results
  • Engine Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

impact wrench mod 875191182 what does pt #35,36,37 do? 875191182 Craftsman Impact wrench

A:

Thank you for your question and I understand your concern. We do not have any service manuals on impact wrenches but based on the image of the parts, I would suspect it locks/holds the forward/reverse switch in position. Here is a link to Owner's manual for a model 875.191183 which appears to be the same as model 875.191182 if you need one.

I hope this helpful. If the impact wrench needs service, I recommend taking to you local Sears service.

Read More
Joey S -
Sears Technician
February 20, 2014
A:

Those three parts hold the reverse valve (part # 3) in either the forward or reverse position and keep the reverse valve from coming out of the housing. It's commonly known as a detent assembly. If you have to remove the reverse valve for service or repair, those three parts will have to be removed first.

Read More
ERIC -
October 03, 2015
See more answers
Q:

Power Unit Assembly for Craftsman Jack Manufacturer? 875.501390

A:

Thank you for the inquiry and for using SearsPartsDirect.com.

Based upon the model of 875.501390, this Craftsman jack was manufactured in or around year 2000. The 875 starting of the model tells us who the manufacturer of the jack is. In this case, 875 was manufactured by Florida Pneumatic.

Outside of the manufacturer for the jack, I couldn't say for sure if Florida Pneumatic manufactured the power unit or outsourced it to another manufacturer. Hopefully this information will be helpful to you.

If you have any further questions or inquiries, please don't hesitate to ask. Thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
August 27, 2013
A:

All you need to do is look up the OEM Code - For many products, the first three numbers of the Model Number (usually followed by a decimal point) indicate the importer / manufacturer of the product. 875 = Florida Pneumatic - Previous Questions - 875.501390 - @ -http://www.managemylife.com/mmh/questions?q=875.501390

Read More
Anonymous -
August 27, 2013
A:

Anonymous raised a good point. The first three numbers does tell the manufacturer for any Craftsman or Kenmore product. To further expand on that, I have attached a complete source code identifier for all Sears's products. This should be of help for any appliance or product you have from Sears under Kenmore or Craftsman, or even the old Sears brand.

Source Code Identifier based upon first 3 digits

If you have any further questions, please don't hesitate to ask. Thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
August 27, 2013
A:

Josh, Thanks for the reply and apologies on my late reply. Quick question for you - are there any rebuild kits for these power units? I still have my old one and I'd like to try and repair it. Any way of getting a schematic? Thanks!

Read More
Jesse -
September 16, 2013
A:

Hey Jesse, thanks for the response. 

It looks like the power unit on this Craftsman Jack is being sold as a complete unit, no rebuild kit being offered. Usually that's the case for the power units, I think the primary factor is because there would be a liability issue if someone was to rebuild them and have it fail prematurely and cause injury.

As requested, I have attached a schematic for this unit showing the parts breakdown. You will see the power unit listed as # 1 on the visual. Hopefully this helps.  

Thanks for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
September 16, 2013
A:

Wait Josh, I meant do you have a schematic for the internals of the power unit?

Read More
Jesse -
September 16, 2013
A:

No, I sure don't. Since it's not being broken down by the manufacturer, I have nothing in regards to part numbers or visuals on it. You might be able to make contact with the manufacturer and see what they would suggest in regards to a rebuild or any internal specs/schematics for it. That would be your best bet.

Read More
Jeff Wallace Sr -
Sears Technician
September 16, 2013
A:

And that again would be Florida Pneumatic/Quality International?

Read More
Jesse -
September 16, 2013
A:

Exactly, I believe I've got thier website for you, just click here to be directed to the page I see. It gives a good contact number to call. It would be a good place to start. Hopefully it helps.

Read More
Jeff Wallace Sr -
Sears Technician
September 16, 2013
A:

Great - thanks Josh for all of your help. Should I find anything out I will post it back here.

Read More
Jesse -
September 16, 2013
See more answers
Q:

Air tools Diagnosis and Parts recomendation ?

A:

I am sorry to hear that you are experiencing some difficulties with your air tools. The ManageMyLife website is a great place to find answers to questions that need qualified and insightful responses. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner. I did find this expert response that might help.

Read More
James -
April 10, 2013
A:

 

Thank you for your question and I understand your concern.

If there is not enough air pressure supplied to the air ratchet and impact wrench, the units will operate and only allow air to exhaust when the trigger is pulled.  Check the air compressor air pressure; the air tools require a maximum of about 90 PSI at 2-5 CFM.

 The impact wrench and air ratchet might need lubrication. To manually lubricate, disconnect the tool from the air line. Depress the trigger and put 3-4 drops of air tool oil (you can use sewing machine or 3 in 1 oil) into the air inlet fitting. Run the tool for 30 seconds and the oil will be distributed through the tool. 

If it will not operate at 90 PSI after oiling, then it could have leaky seals or the rotor is seized. The units would have to be carefully dis-assembled paying close attention to the location and order of the parts. 

 

Your best solution is to take them both in for repair/service. If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician.  Here is a link that will provide the nearest drop-off locations:  Sears Home Services

 

 

Read More
Joey S -
Sears Technician
April 12, 2013
A:

i have the same problem with my 875199840 but it leaks air without pulling the trigger wont work

Read More
robert -
August 16, 2015
See more answers